- Gen - Class in com.powerdata.openpa
-
- Gen(GenList, int) - Constructor for class com.powerdata.openpa.Gen
-
- Gen.Mode - Enum in com.powerdata.openpa
-
- Gen.Type - Enum in com.powerdata.openpa
-
- GeneratingUnit - Enum in com.powerdata.openpa.tools.psmfmt
-
- GeneratingUnitOPA - Class in com.powerdata.openpa.tools.psmfmt
-
- GeneratingUnitOPA(PAModel) - Constructor for class com.powerdata.openpa.tools.psmfmt.GeneratingUnitOPA
-
- Generator - Static variable in class com.powerdata.openpa.psseraw.PsseClassSetVersion29
-
- GenList - Interface in com.powerdata.openpa
-
- GenList.ListAccess<R> - Interface in com.powerdata.openpa
-
- GenVarMonitor - Class in com.powerdata.openpa.pwrflow
-
Monitor generator vars and convert bus type if needed
- GenVarMonitor(ElectricalIslandList, BusTypeUtil, BusList, SpSymFltMatrix, BusMonitor.Action, BusMonitor.Action) - Constructor for class com.powerdata.openpa.pwrflow.GenVarMonitor
-
- get(int) - Method in class com.powerdata.openpa.ACBranchList
-
- get(int) - Method in class com.powerdata.openpa.FixedShuntList
-
- get(int) - Method in class com.powerdata.openpa.GroupList
-
Return the group at the given index in the list
- get(int) - Method in class com.powerdata.openpa.OneTermDevList
-
- get(int) - Method in class com.powerdata.openpa.pwrflow.ACBranchExtList
-
- get(int) - Method in class com.powerdata.openpa.pwrflow.ACBranchFlows
-
- get(int) - Method in class com.powerdata.openpa.pwrflow.ACBranchJacobianList
-
- get(int) - Method in class com.powerdata.openpa.pwrflow.ConvergenceList
-
- get(int) - Method in class com.powerdata.openpa.pwrflow.FixedShuntCalcList
-
- get(int) - Method in class com.powerdata.openpa.pwrflow.Mismatch
-
Return the mismatch at a bus (index)
- get() - Method in class com.powerdata.openpa.pwrflow.Mismatch
-
Access the entire mismatch array
- get(int) - Method in class com.powerdata.openpa.pwrflow.SVCCalcList
-
- get(int) - Method in class com.powerdata.openpa.se.ObservableIslandList
-
- get(ListMetaType, PALists) - Static method in class com.powerdata.openpa.tools.ACBranchByType
-
- get(int) - Method in class com.powerdata.openpa.tools.ComplexList
-
- get(int) - Method in class com.powerdata.openpa.tools.ComplexSublist
-
- get(int) - Method in class com.powerdata.openpa.tools.matrix.JacobianArrayList
-
- get(int) - Method in interface com.powerdata.openpa.tools.matrix.JacobianList
-
- get(int) - Method in class com.powerdata.openpa.tools.matrix.SpSymMtrxFactPattern.EliminatedNodeList
-
- get(int) - Method in class com.powerdata.openpa.tools.PComplexList
-
- get(int) - Method in interface com.powerdata.openpa.tools.psmfmt.ExportOpenPA.ListAccess
-
- get(int) - Method in class com.powerdata.openpa.tools.psmfmt.ExportOpenPA.StringWrap
-
- get(int) - Method in class com.powerdata.openpa.tools.QueryString
-
- get(String) - Method in class com.powerdata.openpa.tools.QueryString
-
- get(int, int) - Method in class com.powerdata.openpa.tools.SimpleCSV
-
- get(String, int) - Method in class com.powerdata.openpa.tools.SimpleCSV
-
- get(int) - Method in class com.powerdata.openpa.tools.SimpleCSV
-
- get(String) - Method in class com.powerdata.openpa.tools.SimpleCSV
-
- get(int) - Method in class com.powerdata.openpa.TwoTermDevList
-
- get1TBus(OneTermDevListIfc<? extends OneTermDev>) - Method in interface com.powerdata.openpa.BusRefIndex
-
Get the list of bus indexes for the one-terminal device list
- get2TBus(TwoTermDevListIfc<? extends TwoTermDev>) - Method in interface com.powerdata.openpa.BusRefIndex
-
Get lists of bus indexes for two-terminal device list
- getACBranches() - Method in class com.powerdata.openpa.Group
-
- getACBranches() - Method in interface com.powerdata.openpa.PALists
-
get all AC Branches
- getAllBuses() - Method in class com.powerdata.openpa.tools.LinkNet
-
Return an array of all valid bus indexes.
- getAngIndex(Bus) - Method in class com.powerdata.openpa.se.BusStateMap
-
map a bus to an index value representing the bus angle
- getArea() - Method in class com.powerdata.openpa.Bus
-
- getArea(int) - Method in interface com.powerdata.openpa.BusList
-
- getArea() - Method in interface com.powerdata.openpa.BusList
-
- getArea() - Method in class com.powerdata.openpa.psseraw.PsseRepository.BusInfo
-
- getAreaInterchange() - Method in class com.powerdata.openpa.psseraw.PsseClassSet
-
- getAreaInterchange() - Method in class com.powerdata.openpa.psseraw.PsseClassSetVersion29
-
- getAreas() - Method in interface com.powerdata.openpa.PAModel
-
get Areas
- getAreaSublist(AreaList, int[]) - Static method in class com.powerdata.openpa.SubLists
-
- getB() - Method in class com.powerdata.openpa.FixedShunt
-
get shunt admittance in MVAr @ unity bus voltage
- getB(int) - Method in class com.powerdata.openpa.FixedShuntList
-
- getB() - Method in class com.powerdata.openpa.FixedShuntList
-
- getB(int) - Method in interface com.powerdata.openpa.FixedShuntListIfc
-
- getB() - Method in interface com.powerdata.openpa.FixedShuntListIfc
-
- getBaseKV() - Method in class com.powerdata.openpa.VoltageLevel
-
- getBaseKV(int) - Method in interface com.powerdata.openpa.VoltageLevelList
-
- getBaseKV() - Method in interface com.powerdata.openpa.VoltageLevelList
-
- getBaseList() - Method in class com.powerdata.openpa.ACBranchList
-
return the unwrapped version of the list
- getBaskv() - Method in class com.powerdata.openpa.psseraw.PsseRepository.BusInfo
-
- getBDiag() - Method in class com.powerdata.openpa.pwrflow.ACBranchAdjacencies.MatrixElementBuilder
-
- getBDiag() - Method in class com.powerdata.openpa.tools.matrix.SpSymFltMatrix
-
- getBmag() - Method in class com.powerdata.openpa.ACBranch
-
get transformer magnetizing susceptance p.u.
- getBmag(int) - Method in class com.powerdata.openpa.ACBranchList
-
- getBmag() - Method in class com.powerdata.openpa.ACBranchList
-
- getBmag(int) - Method in interface com.powerdata.openpa.ACBranchListIfc
-
- getBmag() - Method in interface com.powerdata.openpa.ACBranchListIfc
-
- getBOffDiag() - Method in class com.powerdata.openpa.pwrflow.ACBranchAdjacencies.MatrixElementBuilder
-
- getBoolean(String, boolean) - Static method in class com.powerdata.openpa.psseraw.PsseEquipment
-
- getBooleans(int) - Method in class com.powerdata.openpa.tools.SimpleCSV
-
- getBooleans(String) - Method in class com.powerdata.openpa.tools.SimpleCSV
-
- getBooleans(String[]) - Method in class com.powerdata.openpa.tools.SimpleCSV
-
- getBpp(int) - Method in class com.powerdata.openpa.pwrflow.SVCCalcList
-
Return a suseptance value suitable for B'' (per-unit) (this is calculated at the
same time as the injection)
- getBpp() - Method in class com.powerdata.openpa.pwrflow.SVCCalcList.SVCCalc
-
Return a suseptance value suitable for B'' (this is calculated at the
same time as the injection)
- getBranch() - Method in class com.powerdata.openpa.pwrflow.ACBranchExtList.ACBranchExt
-
- getBranch(int) - Method in class com.powerdata.openpa.pwrflow.ACBranchExtList
-
- getBranch() - Method in class com.powerdata.openpa.pwrflow.RATCWorker.Result
-
- getBranchCount() - Method in class com.powerdata.openpa.tools.LinkNet
-
Return the number of branches in the LinkNet.
- getBranches() - Method in class com.powerdata.openpa.pwrflow.ACBranchExtList
-
- getBranchFlows() - Method in class com.powerdata.openpa.pwrflow.ACPowerCalc
-
return AC Branch calculator (one for each branch type in PAModel)
- getBranchInsvc(ACBranchListIfc<T>) - Static method in class com.powerdata.openpa.SubLists
-
- getBranchInsvc(List<ACBranchList>) - Static method in class com.powerdata.openpa.SubLists
-
- getBranchSublist(ACBranchListIfc<T>, int[]) - Static method in class com.powerdata.openpa.SubLists
-
- getBus(int) - Method in class com.powerdata.openpa.FixedShuntList
-
- getBus() - Method in class com.powerdata.openpa.FixedShuntList
-
- getBus(int) - Method in interface com.powerdata.openpa.OneTermBaseList
-
- getBus() - Method in interface com.powerdata.openpa.OneTermBaseList.OneTermBase
-
Device terminal Bus
- getBus() - Method in class com.powerdata.openpa.OneTermDev
-
- getBus(int) - Method in class com.powerdata.openpa.OneTermDevList
-
- getBus() - Method in class com.powerdata.openpa.OneTermDevList
-
- getBus() - Method in interface com.powerdata.openpa.OneTermDevListIfc
-
- getBus() - Method in class com.powerdata.openpa.psseraw.PsseClassSet
-
- getBus() - Method in class com.powerdata.openpa.psseraw.PsseClassSetVersion29
-
- getBus() - Method in class com.powerdata.openpa.psseraw.PsseClassSetVersion33
-
- getBus() - Method in class com.powerdata.openpa.pwrflow.Active1TData
-
Get the device bus indexes
- getBus() - Method in interface com.powerdata.openpa.pwrflow.ConvergenceList.WorstVoltage
-
- getBus() - Method in interface com.powerdata.openpa.pwrflow.Mismatch.WorstMM
-
- getBus() - Method in interface com.powerdata.openpa.pwrflow.VoltageSetPoint.SetPoint
-
- getBuses() - Method in interface com.powerdata.openpa.BusRefIndex
-
return the bus list used for this object, either PAModel.getBuses(), or
getSingleBus(), depending on startup configuration
- getBuses() - Method in class com.powerdata.openpa.Group
-
- getBuses(int) - Method in class com.powerdata.openpa.GroupListI
-
return list of buses as appropriate.
- getBuses(int) - Method in interface com.powerdata.openpa.GroupListIfc
-
Get Buses contained in group
- getBuses() - Method in interface com.powerdata.openpa.PALists
-
return list of buses
- getBuses() - Method in class com.powerdata.openpa.pwrflow.BusSetMonitor
-
Deprecated.
- getBuses(BusType) - Method in class com.powerdata.openpa.pwrflow.BusTypeUtil
-
- getBusesForBranch(int) - Method in class com.powerdata.openpa.tools.LinkNet
-
Return the buses for a branch.
- getBusesForComplement(BusType) - Method in class com.powerdata.openpa.pwrflow.BusTypeUtil
-
- getBusIndex(int) - Method in class com.powerdata.openpa.se.BusStateMap
-
Find a bus index given the state column index
- getBusIndexes() - Method in interface com.powerdata.openpa.OneTermDevListIfc
-
- getBusInfo(String) - Method in class com.powerdata.openpa.psseraw.PsseRepository
-
- getBusIslandMap() - Method in class com.powerdata.openpa.tools.LinkNet.GroupMap
-
- getBusName(String) - Method in class com.powerdata.openpa.psseraw.PsseRepository
-
- getBusSublist(BusList, int[]) - Static method in class com.powerdata.openpa.SubLists
-
- getBusTypes() - Method in class com.powerdata.openpa.pwrflow.FDPowerFlow
-
Deprecated.
- getByBus(Bus) - Method in interface com.powerdata.openpa.BusRefIndex
-
Convert a connectivity-based bus to this topology
- getByBus(Bus) - Method in class com.powerdata.openpa.GroupListI
-
- getByBus(Bus) - Method in interface com.powerdata.openpa.GroupListIfc
-
Return a group object by Bus
- getByID(String) - Method in class com.powerdata.openpa.ACBranchList
-
- getByID(String) - Method in interface com.powerdata.openpa.BaseList
-
- getByID(String) - Method in class com.powerdata.openpa.FixedShuntList
-
- getByID(String) - Method in class com.powerdata.openpa.OneTermDevList
-
- getByID(String) - Method in class com.powerdata.openpa.TwoTermDevList
-
- getByKey(int) - Method in class com.powerdata.openpa.ACBranchList
-
- getByKey(int) - Method in interface com.powerdata.openpa.BaseList
-
- getByKey(int) - Method in class com.powerdata.openpa.FixedShuntList
-
- getByKey(int) - Method in class com.powerdata.openpa.OneTermDevList
-
- getByKey(int) - Method in class com.powerdata.openpa.TwoTermDevList
-
- getByte(int, int) - Method in class com.powerdata.openpa.tools.SimpleCSV
-
- getByte(String, int) - Method in class com.powerdata.openpa.tools.SimpleCSV
-
- getCaseTime() - Method in class com.powerdata.openpa.psseraw.PsseHeader
-
- getChangeCode() - Method in class com.powerdata.openpa.psseraw.PsseHeader
-
- getChanges() - Method in interface com.powerdata.openpa.PAModel
-
Get a set of changes made to the model
- getClassName() - Method in class com.powerdata.openpa.psseraw.PsseClass
-
- GetClassSetForVersion(String) - Static method in class com.powerdata.openpa.psseraw.PsseClassSet
-
- getCode() - Method in enum com.powerdata.openpa.pwrflow.CAWorker.Status
-
- getColCount() - Method in class com.powerdata.openpa.tools.SimpleCSV
-
- getColMeta() - Method in interface com.powerdata.openpa.ColChange
-
get column meta type
- getColTypes() - Method in class com.powerdata.openpa.ACBranchList
-
- getColTypes() - Method in interface com.powerdata.openpa.AreaList
-
- getColTypes() - Method in interface com.powerdata.openpa.BaseList
-
- getColTypes() - Method in interface com.powerdata.openpa.BusList
-
- getColTypes() - Method in interface com.powerdata.openpa.ElectricalIslandList
-
- getColTypes() - Method in class com.powerdata.openpa.FixedShuntList
-
- getColTypes() - Method in interface com.powerdata.openpa.GenList
-
- getColTypes() - Method in class com.powerdata.openpa.GroupList
-
- getColTypes() - Method in interface com.powerdata.openpa.ImpedanceCorrectionList
-
- getColTypes() - Method in interface com.powerdata.openpa.LineList
-
- getColTypes() - Method in interface com.powerdata.openpa.LoadList
-
- getColTypes() - Method in class com.powerdata.openpa.OneTermDevList
-
- getColTypes() - Method in interface com.powerdata.openpa.OwnerList
-
- getColTypes() - Method in interface com.powerdata.openpa.PhaseShifterList
-
- getColTypes() - Method in class com.powerdata.openpa.se.ObservableIslandList
-
- getColTypes() - Method in interface com.powerdata.openpa.SeriesCapList
-
- getColTypes() - Method in interface com.powerdata.openpa.SeriesReacList
-
- getColTypes() - Method in interface com.powerdata.openpa.ShuntCapList
-
- getColTypes() - Method in interface com.powerdata.openpa.ShuntReacList
-
- getColTypes() - Method in interface com.powerdata.openpa.StationList
-
- getColTypes() - Method in interface com.powerdata.openpa.SteamTurbineList
-
- getColTypes() - Method in interface com.powerdata.openpa.SVCList
-
- getColTypes() - Method in interface com.powerdata.openpa.SwitchedShuntList
-
- getColTypes() - Method in interface com.powerdata.openpa.SwitchList
-
- getColTypes() - Method in interface com.powerdata.openpa.TransformerList
-
- getColTypes() - Method in interface com.powerdata.openpa.TwoTermDCLineList
-
- getColTypes() - Method in class com.powerdata.openpa.TwoTermDevList
-
- getColTypes() - Method in interface com.powerdata.openpa.VoltageLevelList
-
- getColumnCount() - Method in class com.powerdata.openpa.tools.matrix.ArrayJacobianMatrix
-
- getColumnCount() - Method in class com.powerdata.openpa.tools.matrix.FloatArrayMatrix
-
- getColumnCount() - Method in interface com.powerdata.openpa.tools.matrix.FloatMatrix
-
Return the number of columns in the matrix
- getColumnCount() - Method in interface com.powerdata.openpa.tools.matrix.Matrix
-
Return the number of columns in the matrix
- getColumnCount() - Method in class com.powerdata.openpa.tools.matrix.SpSymFltMatrix
-
- getColumnData(ColumnMeta) - Method in class com.powerdata.openpa.ACBranchList
-
- getColumnData(ColumnMeta) - Method in interface com.powerdata.openpa.AreaList
-
- getColumnData(ColumnMeta) - Method in interface com.powerdata.openpa.BaseList
-
- getColumnData(ColumnMeta) - Method in interface com.powerdata.openpa.BusList
-
- getColumnData(ColumnMeta) - Method in interface com.powerdata.openpa.ElectricalIslandList
-
- getColumnData(ColumnMeta) - Method in class com.powerdata.openpa.FixedShuntList
-
- getColumnData(ColumnMeta) - Method in interface com.powerdata.openpa.GenList
-
- getColumnData(ColumnMeta) - Method in class com.powerdata.openpa.GroupList
-
- getColumnData(ColumnMeta) - Method in interface com.powerdata.openpa.LineList
-
- getColumnData(ColumnMeta) - Method in interface com.powerdata.openpa.LoadList
-
- getColumnData(ColumnMeta) - Method in class com.powerdata.openpa.OneTermDevList
-
- getColumnData(ColumnMeta) - Method in interface com.powerdata.openpa.OwnerList
-
- getColumnData(ColumnMeta) - Method in interface com.powerdata.openpa.PhaseShifterList
-
- getColumnData(ColumnMeta) - Method in class com.powerdata.openpa.se.ObservableIslandList
-
- getColumnData(ColumnMeta) - Method in interface com.powerdata.openpa.SeriesCapList
-
- getColumnData(ColumnMeta) - Method in interface com.powerdata.openpa.SeriesReacList
-
- getColumnData(ColumnMeta) - Method in interface com.powerdata.openpa.ShuntCapList
-
- getColumnData(ColumnMeta) - Method in interface com.powerdata.openpa.ShuntReacList
-
- getColumnData(ColumnMeta) - Method in interface com.powerdata.openpa.StationList
-
- getColumnData(ColumnMeta) - Method in interface com.powerdata.openpa.SVCList
-
- getColumnData(ColumnMeta) - Method in interface com.powerdata.openpa.SwitchedShuntList
-
- getColumnData(ColumnMeta) - Method in interface com.powerdata.openpa.SwitchList
-
- getColumnData(ColumnMeta) - Method in interface com.powerdata.openpa.TransformerList
-
- getColumnData(ColumnMeta) - Method in interface com.powerdata.openpa.TwoTermDCLineList
-
- getColumnData(ColumnMeta) - Method in class com.powerdata.openpa.TwoTermDevList
-
- getColumnData(ColumnMeta) - Method in interface com.powerdata.openpa.VoltageLevelList
-
- getColumnID(int) - Method in interface com.powerdata.openpa.tools.matrix.MatrixDebug
-
- getColumnNames() - Method in class com.powerdata.openpa.tools.SimpleCSV
-
- getComplexV(Bus) - Static method in class com.powerdata.openpa.tools.PAMath
-
- getComplexV(BusList) - Static method in class com.powerdata.openpa.tools.PAMath
-
get bus complex voltage.
- getConnectionCount(int) - Method in class com.powerdata.openpa.tools.LinkNet
-
Return the number of connections for a bus.
- getConnectionCounts() - Method in class com.powerdata.openpa.tools.LinkNet
-
- getContObj() - Method in interface com.powerdata.openpa.pwrflow.ContingencySet.Contingency
-
- getControlMode() - Method in class com.powerdata.openpa.PhaseShifter
-
- getControlMode(int) - Method in interface com.powerdata.openpa.PhaseShifterList
-
return the phase shifter control mode
- getControlMode() - Method in interface com.powerdata.openpa.PhaseShifterList
-
return the control mode for all phase shifters
- getConvergenceTolerance() - Method in class com.powerdata.openpa.pwrflow.FDPowerFlow
-
Get the convergence tolerance for both active and reactive mismatches.
- getConvergenceTolerance() - Method in class com.powerdata.openpa.se.StateEstimator
-
Get convergence tolerance
- getCount(int) - Method in class com.powerdata.openpa.tools.BusConnectionsPriQ
-
- getDevice() - Method in class com.powerdata.openpa.pwrflow.CAWorker.Result
-
- getDir() - Method in class com.powerdata.openpa.psseraw.PsseRepository
-
- getDouble(String, double) - Static method in class com.powerdata.openpa.psseraw.PsseEquipment
-
- getDouble(int, int) - Method in class com.powerdata.openpa.tools.SimpleCSV
-
- getDouble(String, int) - Method in class com.powerdata.openpa.tools.SimpleCSV
-
- getDoubles(int) - Method in class com.powerdata.openpa.tools.SimpleCSV
-
- getDoubles(String) - Method in class com.powerdata.openpa.tools.SimpleCSV
-
- getDoubles(String[]) - Method in class com.powerdata.openpa.tools.SimpleCSV
-
- getDpda(int) - Method in class com.powerdata.openpa.tools.matrix.JacobianArrayList
-
- getDpda() - Method in interface com.powerdata.openpa.tools.matrix.JacobianElement
-
get the partial derivative of active power with respect to voltage angle
- getDpda() - Method in class com.powerdata.openpa.tools.matrix.JacobianElement.JacobianElementContainer
-
- getDpda() - Method in class com.powerdata.openpa.tools.matrix.JacobianList.Element
-
- getDpda(int) - Method in interface com.powerdata.openpa.tools.matrix.JacobianList
-
get the partial derivative of active power with respect to voltage angle
- getDpda() - Method in class com.powerdata.openpa.tools.matrix.JacobianMatrix.Element
-
- getDpda(int, int) - Method in interface com.powerdata.openpa.tools.matrix.JacobianMatrix
-
get the partial derivative of active power with respect to voltage angle
- getDpdv(int) - Method in class com.powerdata.openpa.tools.matrix.JacobianArrayList
-
- getDpdv() - Method in interface com.powerdata.openpa.tools.matrix.JacobianElement
-
get the partial derivative of active power with respect to voltage magnitude
- getDpdv() - Method in class com.powerdata.openpa.tools.matrix.JacobianElement.JacobianElementContainer
-
- getDpdv() - Method in class com.powerdata.openpa.tools.matrix.JacobianList.Element
-
- getDpdv(int) - Method in interface com.powerdata.openpa.tools.matrix.JacobianList
-
get the partial derivative of active power with respect to voltage magnitude
- getDpdv() - Method in class com.powerdata.openpa.tools.matrix.JacobianMatrix.Element
-
- getDpdv(int, int) - Method in interface com.powerdata.openpa.tools.matrix.JacobianMatrix
-
get the partial derivative of active power with respect to voltage magnitude
- getDqda(int) - Method in class com.powerdata.openpa.tools.matrix.JacobianArrayList
-
- getDqda() - Method in interface com.powerdata.openpa.tools.matrix.JacobianElement
-
get the partial derivative of reactive power with respect to voltage angle
- getDqda() - Method in class com.powerdata.openpa.tools.matrix.JacobianElement.JacobianElementContainer
-
- getDqda() - Method in class com.powerdata.openpa.tools.matrix.JacobianList.Element
-
- getDqda(int) - Method in interface com.powerdata.openpa.tools.matrix.JacobianList
-
get the partial derivative of reactive power with respect to voltage angle
- getDqda() - Method in class com.powerdata.openpa.tools.matrix.JacobianMatrix.Element
-
- getDqda(int, int) - Method in interface com.powerdata.openpa.tools.matrix.JacobianMatrix
-
get the partial derivative of reactive power with respect to voltage angle
- getDqdv(int) - Method in class com.powerdata.openpa.tools.matrix.JacobianArrayList
-
- getDqdv() - Method in interface com.powerdata.openpa.tools.matrix.JacobianElement
-
get the partial derivative of reactive power with respect to voltage magnitude
- getDqdv() - Method in class com.powerdata.openpa.tools.matrix.JacobianElement.JacobianElementContainer
-
- getDqdv() - Method in class com.powerdata.openpa.tools.matrix.JacobianList.Element
-
- getDqdv(int) - Method in interface com.powerdata.openpa.tools.matrix.JacobianList
-
get the partial derivative of reactive power with respect to voltage magnitude
- getDqdv() - Method in class com.powerdata.openpa.tools.matrix.JacobianMatrix.Element
-
- getDqdv(int, int) - Method in interface com.powerdata.openpa.tools.matrix.JacobianMatrix
-
get the partial derivative of reactive power with respect to voltage magnitude
- getDz(PComplexList) - Method in class com.powerdata.openpa.se.MeasMgr
-
Calculate the differences between measured and estimated values, and
apply confidence factor
- getElectricalIslands() - Method in interface com.powerdata.openpa.PAModel
-
return the islands
- getElimBus() - Method in class com.powerdata.openpa.tools.matrix.FactorizedFltMatrix
-
- getElimConnectionCounts() - Method in class com.powerdata.openpa.tools.LinkNet
-
- getElimEdgeCount() - Method in class com.powerdata.openpa.tools.matrix.SpSymMtrxFactorizer
-
Get the number of edges that were eliminated during nodal elimination
- getElimEdgeOrder() - Method in class com.powerdata.openpa.tools.matrix.SpSymMtrxFactorizer
-
Get the order in which edges were eliminated
- getElimEdges() - Method in class com.powerdata.openpa.tools.matrix.SpSymMtrxFactPattern.EliminatedNode
-
Get the set of eliminated edges
- getElimFromNode() - Method in class com.powerdata.openpa.tools.matrix.SpSymMtrxFactorizer
-
Get the from-side nodes of eliminated edges
- getEliminatedBuses() - Method in class com.powerdata.openpa.tools.matrix.SpSymMtrxFactPattern
-
- getElimNdCount() - Method in class com.powerdata.openpa.tools.matrix.SpSymMtrxFactorizer
-
Get the number of nodes eliminated
- getElimNdOrder() - Method in class com.powerdata.openpa.tools.matrix.SpSymMtrxFactorizer
-
Returns a list of how the nodes were eliminated
- getElimNodeNdx() - Method in class com.powerdata.openpa.tools.matrix.SpSymMtrxFactPattern.EliminatedNode
-
Get the index of the node within the original order used by the matrix
- getElimToNode() - Method in class com.powerdata.openpa.tools.matrix.SpSymMtrxFactorizer
-
Get the to-side nodes of eliminated edges
- getErrors() - Method in interface com.powerdata.openpa.ModelBuilder
-
- getFACTSDevice() - Method in class com.powerdata.openpa.psseraw.PsseClassSet
-
- getFACTSDevice() - Method in class com.powerdata.openpa.psseraw.PsseClassSetVersion29
-
- getFACTSDevice() - Method in class com.powerdata.openpa.psseraw.PsseClassSetVersion30
-
- getField(int) - Method in class com.powerdata.openpa.tools.QueryString
-
- getFieldCount() - Method in class com.powerdata.openpa.tools.QueryString
-
- getFilledInEdges() - Method in class com.powerdata.openpa.tools.matrix.SpSymMtrxFactPattern.EliminatedNode
-
Get the filled-in edges.
- getFirst() - Method in class com.powerdata.openpa.ImpedanceCorrectionList.ImpedanceCorrectionData
-
- getFixedShunt() - Method in class com.powerdata.openpa.psseraw.PsseClassSet
-
- getFixedShunt() - Method in class com.powerdata.openpa.psseraw.PsseClassSetVersion29
-
- getFixedShunt() - Method in class com.powerdata.openpa.psseraw.PsseClassSetVersion33
-
- getFixedShuntCalc() - Method in class com.powerdata.openpa.pwrflow.ACPowerCalc
-
return fixed shunt calculator (one for each list PAModel)
- getFixedShuntInsvc(FixedShuntListIfc<T>) - Static method in class com.powerdata.openpa.SubLists
-
- getFixedShuntInsvc(List<FixedShuntList>) - Static method in class com.powerdata.openpa.SubLists
-
- getFixedShunts() - Method in class com.powerdata.openpa.Group
-
- getFixedShunts() - Method in interface com.powerdata.openpa.PALists
-
- getFixedShuntSublist(FixedShuntListIfc<T>, int[]) - Static method in class com.powerdata.openpa.SubLists
-
- getFloat(String) - Static method in class com.powerdata.openpa.psseraw.PsseEquipment
-
- getFloat(String, float) - Static method in class com.powerdata.openpa.psseraw.PsseEquipment
-
- getFloat(int, int) - Method in class com.powerdata.openpa.tools.SimpleCSV
-
- getFloat(String, int) - Method in class com.powerdata.openpa.tools.SimpleCSV
-
- getFloats(int) - Method in class com.powerdata.openpa.tools.SimpleCSV
-
- getFloats(String) - Method in class com.powerdata.openpa.tools.SimpleCSV
-
- getFloats(String[]) - Method in class com.powerdata.openpa.tools.SimpleCSV
-
- getFreq() - Method in class com.powerdata.openpa.ElectricalIsland
-
- getFreq(int) - Method in interface com.powerdata.openpa.ElectricalIslandList
-
- getFreq() - Method in interface com.powerdata.openpa.ElectricalIslandList
-
- getFreqSrcPri() - Method in class com.powerdata.openpa.Bus
-
get frequency source priority
- getFreqSrcPri(int) - Method in interface com.powerdata.openpa.BusList
-
- getFreqSrcPri() - Method in interface com.powerdata.openpa.BusList
-
- getFrequency() - Method in class com.powerdata.openpa.tools.psmfmt.PsmFmtExport
-
- getFromBchg() - Method in class com.powerdata.openpa.ACBranch
-
get from-side charging susceptance
- getFromBchg(int) - Method in class com.powerdata.openpa.ACBranchList
-
- getFromBchg() - Method in class com.powerdata.openpa.ACBranchList
-
- getFromBchg(int) - Method in interface com.powerdata.openpa.ACBranchListIfc
-
- getFromBchg() - Method in interface com.powerdata.openpa.ACBranchListIfc
-
- getFromBchg(int) - Method in interface com.powerdata.openpa.LineList
-
- getFromBchg() - Method in interface com.powerdata.openpa.LineList
-
- getFromBus(int) - Method in class com.powerdata.openpa.ACBranchList
-
- getFromBus() - Method in class com.powerdata.openpa.ACBranchList
-
- getFromBus() - Method in class com.powerdata.openpa.BusRefIndex.TwoTerm
-
- getFromBus(int) - Method in interface com.powerdata.openpa.TwoTermBaseList
-
- getFromBus() - Method in interface com.powerdata.openpa.TwoTermBaseList.TwoTermBase
-
get from-side Bus
- getFromBus() - Method in class com.powerdata.openpa.TwoTermDev
-
- getFromBus(int) - Method in class com.powerdata.openpa.TwoTermDevList
-
- getFromBus() - Method in class com.powerdata.openpa.TwoTermDevList
-
- getFromBus() - Method in interface com.powerdata.openpa.TwoTermDevListIfc
-
- getFromBusIndexes() - Method in interface com.powerdata.openpa.TwoTermDevListIfc
-
- getFromMaxTap() - Method in class com.powerdata.openpa.Transformer
-
- getFromMaxTap(int) - Method in interface com.powerdata.openpa.TransformerList
-
- getFromMaxTap() - Method in interface com.powerdata.openpa.TransformerList
-
- getFromMinTap() - Method in class com.powerdata.openpa.Transformer
-
- getFromMinTap(int) - Method in interface com.powerdata.openpa.TransformerList
-
- getFromMinTap() - Method in interface com.powerdata.openpa.TransformerList
-
- getFromMutual() - Method in class com.powerdata.openpa.pwrflow.ACBranchJacobianList.ACBranchJacobian
-
get partial derivatives of from-side power with respect to to-side voltage
- getFromMutual(int) - Method in class com.powerdata.openpa.pwrflow.ACBranchJacobianList
-
get partial derivatives of from-side power with respect to to-side voltage
- getFromP(int) - Method in class com.powerdata.openpa.ACBranchList
-
- getFromP() - Method in class com.powerdata.openpa.ACBranchList
-
- getFromP() - Method in class com.powerdata.openpa.TwoTermDev
-
from-side active power (MW)
- getFromP(int) - Method in class com.powerdata.openpa.TwoTermDevList
-
- getFromP() - Method in class com.powerdata.openpa.TwoTermDevList
-
- getFromP(int) - Method in interface com.powerdata.openpa.TwoTermDevListIfc
-
- getFromP() - Method in interface com.powerdata.openpa.TwoTermDevListIfc
-
- getFromQ(int) - Method in class com.powerdata.openpa.ACBranchList
-
- getFromQ() - Method in class com.powerdata.openpa.ACBranchList
-
- getFromQ() - Method in class com.powerdata.openpa.TwoTermDev
-
from-side reactive power (MVAr)
- getFromQ(int) - Method in class com.powerdata.openpa.TwoTermDevList
-
- getFromQ() - Method in class com.powerdata.openpa.TwoTermDevList
-
- getFromQ(int) - Method in interface com.powerdata.openpa.TwoTermDevListIfc
-
- getFromQ() - Method in interface com.powerdata.openpa.TwoTermDevListIfc
-
- getFromSelf() - Method in class com.powerdata.openpa.pwrflow.ACBranchJacobianList.ACBranchJacobian
-
get partial derivatives of from-side power with respect to from-side voltage
- getFromSelf(int) - Method in class com.powerdata.openpa.pwrflow.ACBranchJacobianList
-
get partial derivatives of from-side power with respect to from-side voltage
- getFromSelfB() - Method in interface com.powerdata.openpa.pwrflow.BMtrxElemBldr.BMtrxElem
-
Deprecated.
- getFromSidePower() - Method in class com.powerdata.openpa.pwrflow.ACBranchFlows.ACBranchFlow
-
- getFromSidePower() - Method in class com.powerdata.openpa.pwrflow.ACBranchFlows
-
Returns the from-side power of each branch per-unit on 100 MVA base
- getFromSidePower(int) - Method in class com.powerdata.openpa.pwrflow.ACBranchFlows
-
Get calculated power on the "from-side" of the branch
- getFromStepSize() - Method in class com.powerdata.openpa.Transformer
-
- getFromStepSize(int) - Method in interface com.powerdata.openpa.TransformerList
-
- getFromStepSize() - Method in interface com.powerdata.openpa.TransformerList
-
- getFromTap() - Method in class com.powerdata.openpa.ACBranch
-
get from-side off-nominal tap ratio p.u.
- getFromTap(int) - Method in class com.powerdata.openpa.ACBranchList
-
- getFromTap() - Method in class com.powerdata.openpa.ACBranchList
-
- getFromTap(int) - Method in interface com.powerdata.openpa.ACBranchListIfc
-
- getFromTap() - Method in interface com.powerdata.openpa.ACBranchListIfc
-
- getGenerator() - Method in class com.powerdata.openpa.psseraw.PsseClassSet
-
- getGenerator() - Method in class com.powerdata.openpa.psseraw.PsseClassSetVersion29
-
- getGenerators() - Method in class com.powerdata.openpa.Group
-
- getGenerators(int) - Method in class com.powerdata.openpa.GroupListI
-
return list of generators
- getGenerators(int) - Method in interface com.powerdata.openpa.GroupListIfc
-
Get Generators contained in group
- getGenerators() - Method in interface com.powerdata.openpa.PALists
-
return list of generators
- getGenInsvc(GenList) - Static method in class com.powerdata.openpa.SubLists
-
- getGenSublist(GenList, int[]) - Static method in class com.powerdata.openpa.SubLists
-
- getGmag() - Method in class com.powerdata.openpa.ACBranch
-
get transformer magnetizing conductance p.u.
- getGmag(int) - Method in class com.powerdata.openpa.ACBranchList
-
- getGmag() - Method in class com.powerdata.openpa.ACBranchList
-
- getGmag(int) - Method in interface com.powerdata.openpa.ACBranchListIfc
-
- getGmag() - Method in interface com.powerdata.openpa.ACBranchListIfc
-
- getGroup(int) - Method in class com.powerdata.openpa.tools.ConcurrentGroupLinkNet
-
- getGrp(int) - Method in interface com.powerdata.openpa.GroupIndex
-
get group index for a specific bus index
- getGrp(int[]) - Method in interface com.powerdata.openpa.GroupIndex
-
bulk map group indexes
- getHeader() - Method in class com.powerdata.openpa.psseraw.PsseProcessor
-
- getHeading1() - Method in class com.powerdata.openpa.psseraw.PsseHeader
-
- getHeading2() - Method in class com.powerdata.openpa.psseraw.PsseHeader
-
- getID() - Method in class com.powerdata.openpa.AbstractBaseObject
-
- getID(int) - Method in class com.powerdata.openpa.ACBranchList
-
- getID() - Method in class com.powerdata.openpa.ACBranchList
-
- getID(int) - Method in interface com.powerdata.openpa.BaseList
-
- getID() - Method in interface com.powerdata.openpa.BaseList
-
return array of string object ID's
- getID() - Method in interface com.powerdata.openpa.BaseObject
-
get unique String object identifier
- getID(int) - Method in class com.powerdata.openpa.FixedShuntList
-
- getID() - Method in class com.powerdata.openpa.FixedShuntList
-
- getID(int) - Method in class com.powerdata.openpa.OneTermDevList
-
- getID() - Method in class com.powerdata.openpa.OneTermDevList
-
- getId() - Method in class com.powerdata.openpa.psseraw.PsseRepository.BusInfo
-
- getID(int) - Method in class com.powerdata.openpa.se.ObservableIslandList
-
- getID() - Method in class com.powerdata.openpa.se.ObservableIslandList
-
- GetID(BaseObject) - Static method in class com.powerdata.openpa.tools.EqType
-
- getID(int) - Method in class com.powerdata.openpa.TwoTermDevList
-
- getID() - Method in class com.powerdata.openpa.TwoTermDevList
-
- getIgnoreRatings() - Method in class com.powerdata.openpa.pwrflow.BasicContingencyManager
-
- getImpedanceCorrection() - Method in class com.powerdata.openpa.PhaseShifter
-
- getImpedanceCorrection(int) - Method in interface com.powerdata.openpa.PhaseShifterList
-
- getImpedanceCorrection() - Method in interface com.powerdata.openpa.PhaseShifterList
-
- getImpedanceCorrection() - Method in class com.powerdata.openpa.Transformer
-
- getImpedanceCorrection(int) - Method in interface com.powerdata.openpa.TransformerList
-
- getImpedanceCorrection() - Method in interface com.powerdata.openpa.TransformerList
-
- getImpedanceCorrections() - Method in interface com.powerdata.openpa.PAModel
-
get Impedance Correction for transformers and phase shifters
- getImportTime() - Method in class com.powerdata.openpa.psseraw.PsseHeader
-
- getIndex() - Method in class com.powerdata.openpa.AbstractBaseObject
-
- getIndex(int) - Method in class com.powerdata.openpa.ACBranchList
-
- getIndex(int) - Method in interface com.powerdata.openpa.BaseList
-
- getIndex() - Method in interface com.powerdata.openpa.BaseObjectCore
-
get Index within master list owned by PAModel
- getIndex(int) - Method in class com.powerdata.openpa.FixedShuntList
-
- getIndex(int) - Method in class com.powerdata.openpa.OneTermDevList
-
- getIndex() - Method in class com.powerdata.openpa.pwrflow.ACBranchExtList.ACBranchExt
-
- getIndex() - Method in class com.powerdata.openpa.pwrflow.FixedShuntCalcList.FixedShuntCalc
-
- getIndex() - Method in class com.powerdata.openpa.pwrflow.SVCCalcList.SVCCalc
-
- getIndex(int) - Method in class com.powerdata.openpa.TwoTermDevList
-
- getIndexes(T[]) - Method in interface com.powerdata.openpa.BaseList
-
- getIndexesFromIDs(String[]) - Method in interface com.powerdata.openpa.BaseList
-
- getIndexesFromKeys(int[]) - Method in interface com.powerdata.openpa.BaseList
-
- getInServiceIndexes(InServiceList<? extends InService>) - Static method in class com.powerdata.openpa.SubLists
-
- getInt(String) - Static method in class com.powerdata.openpa.psseraw.PsseEquipment
-
- getInt(String, int) - Static method in class com.powerdata.openpa.psseraw.PsseEquipment
-
- getInt(int, int) - Method in class com.powerdata.openpa.tools.SimpleCSV
-
- getInt(String, int) - Method in class com.powerdata.openpa.tools.SimpleCSV
-
- getInterAreaTransfer() - Method in class com.powerdata.openpa.psseraw.PsseClassSet
-
- getInterAreaTransfer() - Method in class com.powerdata.openpa.psseraw.PsseClassSetVersion29
-
- getInts(int) - Method in class com.powerdata.openpa.tools.SimpleCSV
-
- getInts(String) - Method in class com.powerdata.openpa.tools.SimpleCSV
-
- getInts(String[]) - Method in class com.powerdata.openpa.tools.SimpleCSV
-
- getIsland() - Method in class com.powerdata.openpa.Bus
-
- getIsland(int) - Method in interface com.powerdata.openpa.BusList
-
- getIsland() - Method in class com.powerdata.openpa.pwrflow.ConvergenceList.ConvergenceInfo
-
- getIslandBusCounts() - Method in class com.powerdata.openpa.tools.LinkNet.GroupMap
-
- getIslandCount() - Method in class com.powerdata.openpa.tools.LinkNet.GroupMap
-
- getIslandSublist(ElectricalIslandList, int[]) - Static method in class com.powerdata.openpa.SubLists
-
- getJacobianList() - Method in class com.powerdata.openpa.pwrflow.FixedShuntCalcList
-
- getKey() - Method in class com.powerdata.openpa.AbstractBaseObject
-
- getKey(int) - Method in class com.powerdata.openpa.ACBranchList
-
- getKey(int) - Method in interface com.powerdata.openpa.BaseList
-
- getKey() - Method in interface com.powerdata.openpa.BaseObject
-
unique object integer identifier
- getKey(int) - Method in class com.powerdata.openpa.FixedShuntList
-
- getKey(int) - Method in class com.powerdata.openpa.OneTermDevList
-
- getKey(int) - Method in class com.powerdata.openpa.TwoTermDevList
-
- getKeys() - Method in class com.powerdata.openpa.ACBranchList
-
- getKeys() - Method in interface com.powerdata.openpa.BaseList
-
- getKeys() - Method in interface com.powerdata.openpa.ColChange
-
get changed keys
- getKeys() - Method in class com.powerdata.openpa.FixedShuntList
-
- getKeys() - Method in class com.powerdata.openpa.OneTermDevList
-
- getKeys() - Method in class com.powerdata.openpa.tools.SortedIntOfsNdx
-
- getKeys() - Method in class com.powerdata.openpa.TwoTermDevList
-
- getLast() - Method in class com.powerdata.openpa.ImpedanceCorrectionList.ImpedanceCorrectionData
-
- getLeastX() - Method in class com.powerdata.openpa.PflowModelBuilder
-
limit the branch reactance minimum magnitude, abs(X) > minx, defaults to
0 (no limit)
- getLineInsvc(LineList) - Static method in class com.powerdata.openpa.SubLists
-
- getLines() - Method in class com.powerdata.openpa.Group
-
- getLines(int) - Method in class com.powerdata.openpa.GroupListI
-
return list of lines
- getLines(int) - Method in interface com.powerdata.openpa.GroupListIfc
-
Get Lines contained in group
- getLines() - Method in interface com.powerdata.openpa.PALists
-
return list of lines
- getLines() - Method in class com.powerdata.openpa.psseraw.PsseClass
-
- getLineSublist(LineList, int[]) - Static method in class com.powerdata.openpa.SubLists
-
- getList() - Method in class com.powerdata.openpa.AbstractBaseObject
-
- getList() - Method in interface com.powerdata.openpa.BaseObject
-
return the list
- getList() - Method in class com.powerdata.openpa.Bus
-
- getList(ListMetaType) - Method in interface com.powerdata.openpa.PAModel
-
Get a generic representation of a list based on its enumerated type
- getListMeta() - Method in class com.powerdata.openpa.ACBranchList
-
- getListMeta() - Method in interface com.powerdata.openpa.AreaList
-
- getListMeta() - Method in interface com.powerdata.openpa.BaseList
-
- getListMeta() - Method in interface com.powerdata.openpa.BusList
-
- getListMeta() - Method in interface com.powerdata.openpa.ColChange
-
get list meta type
- getListMeta() - Method in interface com.powerdata.openpa.ElectricalIslandList
-
- getListMeta() - Method in class com.powerdata.openpa.FixedShuntList
-
- getListMeta() - Method in interface com.powerdata.openpa.GenList
-
- getListMeta() - Method in class com.powerdata.openpa.GroupList
-
- getListMeta() - Method in interface com.powerdata.openpa.ImpedanceCorrectionList
-
- getListMeta() - Method in interface com.powerdata.openpa.LineList
-
- getListMeta() - Method in interface com.powerdata.openpa.LoadList
-
- getListMeta() - Method in class com.powerdata.openpa.OneTermDevList
-
- getListMeta() - Method in interface com.powerdata.openpa.OwnerList
-
- getListMeta() - Method in interface com.powerdata.openpa.PhaseShifterList
-
- getListMeta() - Method in class com.powerdata.openpa.se.ObservableIslandList
-
- getListMeta() - Method in interface com.powerdata.openpa.SeriesCapList
-
- getListMeta() - Method in interface com.powerdata.openpa.SeriesReacList
-
- getListMeta() - Method in interface com.powerdata.openpa.ShuntCapList
-
- getListMeta() - Method in interface com.powerdata.openpa.ShuntReacList
-
- getListMeta() - Method in interface com.powerdata.openpa.StationList
-
- getListMeta() - Method in interface com.powerdata.openpa.SteamTurbineList
-
- getListMeta() - Method in interface com.powerdata.openpa.SVCList
-
- getListMeta() - Method in interface com.powerdata.openpa.SwitchedShuntList
-
- getListMeta() - Method in interface com.powerdata.openpa.SwitchList
-
- getListMeta() - Method in interface com.powerdata.openpa.TransformerList
-
- getListMeta() - Method in interface com.powerdata.openpa.TwoTermDCLineList
-
- getListMeta() - Method in class com.powerdata.openpa.TwoTermDevList
-
- getListMeta() - Method in interface com.powerdata.openpa.VoltageLevelList
-
- getListType() - Method in enum com.powerdata.openpa.ColumnMeta
-
- getLoad() - Method in class com.powerdata.openpa.psseraw.PsseClassSet
-
- getLoad() - Method in class com.powerdata.openpa.psseraw.PsseClassSetVersion29
-
- getLoadInsvc(LoadList) - Static method in class com.powerdata.openpa.SubLists
-
- getLoadMW() - Method in class com.powerdata.openpa.pwrflow.ConvergenceList.ConvergenceInfo
-
- getLoads() - Method in class com.powerdata.openpa.Group
-
- getLoads(int) - Method in class com.powerdata.openpa.GroupListI
-
return list of loads
- getLoads(int) - Method in interface com.powerdata.openpa.GroupListIfc
-
Get Loads contained in group
- getLoads() - Method in interface com.powerdata.openpa.PALists
-
return list of loads
- getLoadSublist(LoadList, int[]) - Static method in class com.powerdata.openpa.SubLists
-
- getLODF() - Method in class com.powerdata.openpa.pwrflow.RATCWorker.Result
-
- getLong(int, int) - Method in class com.powerdata.openpa.tools.SimpleCSV
-
- getLong(String, int) - Method in class com.powerdata.openpa.tools.SimpleCSV
-
- getLongs(int) - Method in class com.powerdata.openpa.tools.SimpleCSV
-
- getLongs(String) - Method in class com.powerdata.openpa.tools.SimpleCSV
-
- getLongs(String[]) - Method in class com.powerdata.openpa.tools.SimpleCSV
-
- getLTRating() - Method in class com.powerdata.openpa.ACBranch
-
get long-term branch rating MVA
- getLTRating(int) - Method in class com.powerdata.openpa.ACBranchList
-
- getLTRating() - Method in class com.powerdata.openpa.ACBranchList
-
- getLTRating(int) - Method in interface com.powerdata.openpa.ACBranchListIfc
-
- getLTRating() - Method in interface com.powerdata.openpa.ACBranchListIfc
-
- getMagIndex(Bus) - Method in class com.powerdata.openpa.se.BusStateMap
-
map a bus to an index value representing the bus magitude
- getMap() - Method in class com.powerdata.openpa.BusGrpMapBldr
-
- getMap() - Method in class com.powerdata.openpa.tools.QueryString
-
- getMaxAng() - Method in class com.powerdata.openpa.PhaseShifter
-
- getMaxAng(int) - Method in interface com.powerdata.openpa.PhaseShifterList
-
Get the maximum phase shift angle
- getMaxAng() - Method in interface com.powerdata.openpa.PhaseShifterList
-
- getMaxBusNdx() - Method in class com.powerdata.openpa.tools.LinkNet
-
Return the maximum bus index used plus 1.
- getMaxInterations() - Method in class com.powerdata.openpa.pwrflow.FDPowerFlow
-
Get maximum iterations.
- getMaxIterations() - Method in class com.powerdata.openpa.se.StateEstimator
-
Get the maximum number of iterations
- getMaxKV() - Method in class com.powerdata.openpa.Transformer
-
- getMaxKV(int) - Method in interface com.powerdata.openpa.TransformerList
-
- getMaxKV() - Method in interface com.powerdata.openpa.TransformerList
-
- getMaxP() - Method in class com.powerdata.openpa.Load
-
Get Max Load MW
- getMaxP(int) - Method in interface com.powerdata.openpa.LoadList
-
- getMaxP() - Method in interface com.powerdata.openpa.LoadList
-
- getMaxQ() - Method in class com.powerdata.openpa.Gen
-
Maximum generator reactive power output (MVAr)
- getMaxQ(int) - Method in interface com.powerdata.openpa.GenList
-
- getMaxQ() - Method in interface com.powerdata.openpa.GenList
-
- getMaxQ() - Method in class com.powerdata.openpa.Load
-
Get Max Load MVAr
- getMaxQ(int) - Method in interface com.powerdata.openpa.LoadList
-
- getMaxQ() - Method in interface com.powerdata.openpa.LoadList
-
- getMaxQ() - Method in class com.powerdata.openpa.SVC
-
get maximum MVAr
- getMaxQ(int) - Method in interface com.powerdata.openpa.SVCList
-
- getMaxQ() - Method in interface com.powerdata.openpa.SVCList
-
- getMeasCount() - Method in class com.powerdata.openpa.se.MeasMgr
-
return the managed measurement count
- getMeasJacobian(PComplexList, BusStateMap) - Method in class com.powerdata.openpa.se.MeasMgr
-
Create the measurement jacobian matrix H.
- getMeta() - Method in class com.powerdata.openpa.tools.SimpleCSV
-
- getMinAng() - Method in class com.powerdata.openpa.PhaseShifter
-
- getMinAng(int) - Method in interface com.powerdata.openpa.PhaseShifterList
-
- getMinAng() - Method in interface com.powerdata.openpa.PhaseShifterList
-
- getMinKV() - Method in class com.powerdata.openpa.Transformer
-
- getMinKV(int) - Method in interface com.powerdata.openpa.TransformerList
-
- getMinKV() - Method in interface com.powerdata.openpa.TransformerList
-
- getMinQ() - Method in class com.powerdata.openpa.Gen
-
Minimum generator reactive power output (MVAr)
- getMinQ(int) - Method in interface com.powerdata.openpa.GenList
-
- getMinQ() - Method in interface com.powerdata.openpa.GenList
-
- getMinQ() - Method in class com.powerdata.openpa.SVC
-
get minimum MVAr
- getMinQ(int) - Method in interface com.powerdata.openpa.SVCList
-
- getMinQ() - Method in interface com.powerdata.openpa.SVCList
-
- getMode() - Method in class com.powerdata.openpa.Gen
-
- getMode(int) - Method in interface com.powerdata.openpa.GenList
-
- getMode() - Method in interface com.powerdata.openpa.GenList
-
- getModelDescription() - Method in class com.powerdata.openpa.tools.psmfmt.PsmFmtExport
-
- getModelName() - Method in class com.powerdata.openpa.tools.psmfmt.PsmFmtExport
-
- getModelVersion() - Method in class com.powerdata.openpa.tools.psmfmt.PsmFmtExport
-
- getMultiSectionLine() - Method in class com.powerdata.openpa.psseraw.PsseClassSet
-
- getMultiSectionLine() - Method in class com.powerdata.openpa.psseraw.PsseClassSetVersion29
-
- getMultiTermDC_ACConv() - Method in class com.powerdata.openpa.psseraw.PsseClassSet
-
AC Converter Records - inner record for Multi Terminal DC Lines
- getMultiTermDC_ACConv() - Method in class com.powerdata.openpa.psseraw.PsseClassSetVersion29
-
- getMultiTermDCBus() - Method in class com.powerdata.openpa.psseraw.PsseClassSet
-
DC Bus Records - inner record for Multi Terminal DC Lines
- getMultiTermDCBus() - Method in class com.powerdata.openpa.psseraw.PsseClassSetVersion29
-
- getMultiTermDCLine() - Method in class com.powerdata.openpa.psseraw.PsseClassSet
-
- getMultiTermDCLine() - Method in class com.powerdata.openpa.psseraw.PsseClassSetVersion29
-
- getMultiTermDCLink() - Method in class com.powerdata.openpa.psseraw.PsseClassSet
-
DC Link Records - inner record for Multi Terminal DC Lines
- getMultiTermDCLink() - Method in class com.powerdata.openpa.psseraw.PsseClassSetVersion29
-
- getName() - Method in class com.powerdata.openpa.AbstractBaseObject
-
- getName(int) - Method in class com.powerdata.openpa.ACBranchList
-
- getName() - Method in class com.powerdata.openpa.ACBranchList
-
- getName(int) - Method in interface com.powerdata.openpa.BaseList
-
- getName() - Method in interface com.powerdata.openpa.BaseList
-
name of object
- getName() - Method in interface com.powerdata.openpa.BaseObject
-
get object name
- getName(int) - Method in class com.powerdata.openpa.FixedShuntList
-
- getName() - Method in class com.powerdata.openpa.FixedShuntList
-
- getName(int) - Method in class com.powerdata.openpa.OneTermDevList
-
- getName() - Method in class com.powerdata.openpa.OneTermDevList
-
- getName() - Method in class com.powerdata.openpa.psseraw.PsseField
-
- getName() - Method in class com.powerdata.openpa.psseraw.PsseRepository.BusInfo
-
- getName() - Method in interface com.powerdata.openpa.pwrflow.ContingencySet.Contingency
-
- getName(int) - Method in class com.powerdata.openpa.se.ObservableIslandList
-
- getName() - Method in class com.powerdata.openpa.se.ObservableIslandList
-
- getName(int) - Method in class com.powerdata.openpa.TwoTermDevList
-
- getName() - Method in class com.powerdata.openpa.TwoTermDevList
-
- getNdxs() - Method in interface com.powerdata.openpa.ColChange
-
get changed list indexes
- getNontransformerBranch() - Method in class com.powerdata.openpa.psseraw.PsseClassSet
-
- getNontransformerBranch() - Method in class com.powerdata.openpa.psseraw.PsseClassSetVersion29
-
- getNontransformerBranch() - Method in class com.powerdata.openpa.psseraw.PsseClassSetVersion33
-
- getNumIterP() - Method in class com.powerdata.openpa.pwrflow.ConvergenceList.ConvergenceInfo
-
- getNumIterQ() - Method in class com.powerdata.openpa.pwrflow.ConvergenceList.ConvergenceInfo
-
- getObject(PAModel, ListMetaType, int) - Static method in class com.powerdata.openpa.tools.EqType
-
- getObject(PAModel, long) - Static method in class com.powerdata.openpa.tools.EqType
-
- getObjectName(PAModel, BaseObject) - Static method in class com.powerdata.openpa.tools.PrettyName
-
- getOffset(int) - Method in class com.powerdata.openpa.tools.SNdxKeyOfs
-
get offset for the key, returns -1 if not available
- getOffsets(int[]) - Method in class com.powerdata.openpa.tools.SNdxKeyOfs
-
- getOfs(int) - Method in class com.powerdata.openpa.tools.SortedIntOfsNdx
-
- getOneTermDevices() - Method in class com.powerdata.openpa.Group
-
- getOneTermDevices() - Method in interface com.powerdata.openpa.PALists
-
get all one-terminal devices
- getOpMaxP() - Method in class com.powerdata.openpa.Gen
-
max active power in MW
- getOpMaxP(int) - Method in interface com.powerdata.openpa.GenList
-
- getOpMaxP() - Method in interface com.powerdata.openpa.GenList
-
- getOpMinP() - Method in class com.powerdata.openpa.Gen
-
- getOpMinP(int) - Method in interface com.powerdata.openpa.GenList
-
- getOpMinP() - Method in interface com.powerdata.openpa.GenList
-
- getOrder() - Method in class com.powerdata.openpa.pwrflow.RATCWorker.Result
-
- getOutputMode() - Method in class com.powerdata.openpa.SVC
-
get SVC output operating mode
- getOutputMode(int) - Method in interface com.powerdata.openpa.SVCList
-
get SVC output operating mode
- getOutputMode() - Method in interface com.powerdata.openpa.SVCList
-
get SVC output operating mode
- getOverloads() - Method in class com.powerdata.openpa.pwrflow.CAWorker
-
- getOwner() - Method in class com.powerdata.openpa.Bus
-
- getOwner(int) - Method in interface com.powerdata.openpa.BusList
-
- getOwner() - Method in interface com.powerdata.openpa.BusList
-
- getOwner() - Method in class com.powerdata.openpa.psseraw.PsseClassSet
-
- getOwner() - Method in class com.powerdata.openpa.psseraw.PsseClassSetVersion29
-
- getOwner() - Method in class com.powerdata.openpa.psseraw.PsseRepository.BusInfo
-
- getOwners() - Method in interface com.powerdata.openpa.PAModel
-
get owners
- getOwnerSublist(OwnerList, int[]) - Static method in class com.powerdata.openpa.SubLists
-
- getP(int) - Method in class com.powerdata.openpa.FixedShuntList
-
- getP() - Method in class com.powerdata.openpa.FixedShuntList
-
- getP() - Method in class com.powerdata.openpa.OneTermDev
-
Get device active power in MW
- getP(int) - Method in class com.powerdata.openpa.OneTermDevList
-
- getP() - Method in class com.powerdata.openpa.OneTermDevList
-
- getP(int) - Method in interface com.powerdata.openpa.OneTermDevListIfc
-
- getP() - Method in interface com.powerdata.openpa.OneTermDevListIfc
-
- getP() - Method in class com.powerdata.openpa.pwrflow.Active1TData
-
0
Get the list access array for MW
- getParallel() - Method in class com.powerdata.openpa.pwrflow.BasicContingencyManager
-
- getPFResults() - Method in class com.powerdata.openpa.pwrflow.CAWorker
-
- getPhaseShifterInsvc(PhaseShifterList) - Static method in class com.powerdata.openpa.SubLists
-
- getPhaseShifters() - Method in class com.powerdata.openpa.Group
-
- getPhaseShifters(int) - Method in class com.powerdata.openpa.GroupListI
-
return list of phase shifters
- getPhaseShifters(int) - Method in interface com.powerdata.openpa.GroupListIfc
-
Get Phase Shifters contained in group
- getPhaseShifters() - Method in interface com.powerdata.openpa.PALists
-
return list of phase shifters
- getPhaseShifterSublist(PhaseShifterList, int[]) - Static method in class com.powerdata.openpa.SubLists
-
- getPS() - Method in class com.powerdata.openpa.Gen
-
get the active power setpoint in MW
- getPS(int) - Method in interface com.powerdata.openpa.GenList
-
- getPS() - Method in interface com.powerdata.openpa.GenList
-
- getPsseClasses() - Method in class com.powerdata.openpa.psseraw.PsseClassSet
-
- getPsseClasses() - Method in class com.powerdata.openpa.psseraw.PsseClassSetVersion29
-
- getPsseClasses() - Method in class com.powerdata.openpa.psseraw.PsseClassSetVersion30
-
- getPsseClasses() - Method in class com.powerdata.openpa.psseraw.PsseClassSetVersion33
-
- getPsseClassSet() - Method in class com.powerdata.openpa.psseraw.PsseProcessor
-
- getPvSvcList() - Method in class com.powerdata.openpa.pwrflow.ACPowerCalc
-
Get the set of SVC's with no slope defined.
- getQ(int) - Method in class com.powerdata.openpa.FixedShuntList
-
- getQ() - Method in class com.powerdata.openpa.FixedShuntList
-
- getQ() - Method in class com.powerdata.openpa.OneTermDev
-
Get device reactive power in MVAr
- getQ(int) - Method in class com.powerdata.openpa.OneTermDevList
-
- getQ() - Method in class com.powerdata.openpa.OneTermDevList
-
- getQ(int) - Method in interface com.powerdata.openpa.OneTermDevListIfc
-
- getQ() - Method in interface com.powerdata.openpa.OneTermDevListIfc
-
- getQ() - Method in class com.powerdata.openpa.pwrflow.Active1TData
-
Get the list access array for MVAr
- getQpu() - Method in class com.powerdata.openpa.pwrflow.FixedShuntCalcList.FixedShuntCalc
-
- getQpu(int) - Method in class com.powerdata.openpa.pwrflow.FixedShuntCalcList
-
- getQpu(int) - Method in class com.powerdata.openpa.pwrflow.SVCCalcList
-
Get the calculated reactive injection in MVAr
- getQpu() - Method in class com.powerdata.openpa.pwrflow.SVCCalcList.SVCCalc
-
Get the calculated reactive injection in MVAr
- getQS() - Method in class com.powerdata.openpa.Gen
-
get the reactive power setpoint when not regulating voltage (MVAr)
- getQS(int) - Method in interface com.powerdata.openpa.GenList
-
- getQS() - Method in interface com.powerdata.openpa.GenList
-
- getQS() - Method in class com.powerdata.openpa.SVC
-
get MVAr setpoint used if AVR is off
- getQS(int) - Method in interface com.powerdata.openpa.SVCList
-
get MVAr setpoint used if AVR is off
- getQS() - Method in interface com.powerdata.openpa.SVCList
-
get MVAr setpoint used if AVR is off
- getQuery() - Method in class com.powerdata.openpa.tools.QueryString
-
- getR() - Method in class com.powerdata.openpa.ACBranch
-
get resistance p.u.
- getR(int) - Method in class com.powerdata.openpa.ACBranchList
-
- getR() - Method in class com.powerdata.openpa.ACBranchList
-
- getR(int) - Method in interface com.powerdata.openpa.ACBranchListIfc
-
- getR() - Method in interface com.powerdata.openpa.ACBranchListIfc
-
- getRegBus() - Method in class com.powerdata.openpa.Gen
-
Bus where voltage is regulated
- getRegBus(int) - Method in interface com.powerdata.openpa.GenList
-
- getRegBus() - Method in interface com.powerdata.openpa.GenList
-
- getRegBus() - Method in class com.powerdata.openpa.SVC
-
Bus where voltage is regulated
- getRegBus(int) - Method in interface com.powerdata.openpa.SVCList
-
- getRegBus() - Method in interface com.powerdata.openpa.SVCList
-
- getRegBus() - Method in class com.powerdata.openpa.Transformer
-
- getRegBus(int) - Method in interface com.powerdata.openpa.TransformerList
-
- getRegBus() - Method in interface com.powerdata.openpa.TransformerList
-
- getRegMaxMW() - Method in class com.powerdata.openpa.PhaseShifter
-
- getRegMaxMW(int) - Method in interface com.powerdata.openpa.PhaseShifterList
-
- getRegMaxMW() - Method in interface com.powerdata.openpa.PhaseShifterList
-
- getRegMinMW() - Method in class com.powerdata.openpa.PhaseShifter
-
- getRegMinMW(int) - Method in interface com.powerdata.openpa.PhaseShifterList
-
- getRegMinMW() - Method in interface com.powerdata.openpa.PhaseShifterList
-
- getRemainingNodes() - Method in class com.powerdata.openpa.tools.matrix.SpSymMtrxFactPattern.EliminatedNode
-
Get the set of nodes connected to the eliminated node
- getResults(ConvergenceList) - Method in class com.powerdata.openpa.pwrflow.CAWorker
-
- getResults() - Method in class com.powerdata.openpa.pwrflow.RATCWorker
-
- getRowCount() - Method in class com.powerdata.openpa.tools.matrix.ArrayJacobianMatrix
-
- getRowCount() - Method in class com.powerdata.openpa.tools.matrix.FloatArrayMatrix
-
- getRowCount() - Method in interface com.powerdata.openpa.tools.matrix.FloatMatrix
-
Return the number of rows in the matrix.
- getRowCount() - Method in interface com.powerdata.openpa.tools.matrix.Matrix
-
Return the number of rows in the matrix.
- getRowCount() - Method in class com.powerdata.openpa.tools.matrix.SpSymFltMatrix
-
- getRowCount() - Method in class com.powerdata.openpa.tools.SimpleCSV
-
- getRowID(int) - Method in interface com.powerdata.openpa.tools.matrix.MatrixDebug
-
- getSBASE() - Method in interface com.powerdata.openpa.PAModel
-
- getScalingFactor(int, int) - Method in interface com.powerdata.openpa.ImpedanceCorrectionList
-
- getScalingFactor(int) - Method in interface com.powerdata.openpa.ImpedanceCorrectionList
-
- getScalingFactor() - Method in interface com.powerdata.openpa.ImpedanceCorrectionList
-
- getScalingFactor(int) - Method in class com.powerdata.openpa.ImpedanceCorrectionList.ImpedanceCorrection
-
- getScalingFactor() - Method in class com.powerdata.openpa.ImpedanceCorrectionList.ImpedanceCorrection
-
- getSeriesCapacitors() - Method in class com.powerdata.openpa.Group
-
- getSeriesCapacitors(int) - Method in class com.powerdata.openpa.GroupListI
-
return list of series capacitors
- getSeriesCapacitors(int) - Method in interface com.powerdata.openpa.GroupListIfc
-
Get Series Capacitors contained in group
- getSeriesCapacitors() - Method in interface com.powerdata.openpa.PALists
-
return list of series capacitors
- getSeriesCapInsvc(SeriesCapList) - Static method in class com.powerdata.openpa.SubLists
-
- getSeriesCapSublist(SeriesCapList, int[]) - Static method in class com.powerdata.openpa.SubLists
-
- getSeriesReacInsvc(SeriesReacList) - Static method in class com.powerdata.openpa.SubLists
-
- getSeriesReacSublist(SeriesReacList, int[]) - Static method in class com.powerdata.openpa.SubLists
-
- getSeriesReactors() - Method in class com.powerdata.openpa.Group
-
- getSeriesReactors(int) - Method in class com.powerdata.openpa.GroupListI
-
return list of series reactors
- getSeriesReactors(int) - Method in interface com.powerdata.openpa.GroupListIfc
-
Get Series Reactors contained in group
- getSeriesReactors() - Method in interface com.powerdata.openpa.PALists
-
return list of series reactors
- getShift() - Method in class com.powerdata.openpa.ACBranch
-
get phase shift through branch in Degrees
- getShift(int) - Method in class com.powerdata.openpa.ACBranchList
-
- getShift() - Method in class com.powerdata.openpa.ACBranchList
-
- getShift(int) - Method in interface com.powerdata.openpa.ACBranchListIfc
-
- getShift() - Method in interface com.powerdata.openpa.ACBranchListIfc
-
- getShort(int, int) - Method in class com.powerdata.openpa.tools.SimpleCSV
-
- getShort(String, int) - Method in class com.powerdata.openpa.tools.SimpleCSV
-
- getShorts(int) - Method in class com.powerdata.openpa.tools.SimpleCSV
-
- getShorts(String) - Method in class com.powerdata.openpa.tools.SimpleCSV
-
- getShorts(String[]) - Method in class com.powerdata.openpa.tools.SimpleCSV
-
- getShunt() - Method in class com.powerdata.openpa.pwrflow.FixedShuntCalcList.FixedShuntCalc
-
- getShunt(int) - Method in class com.powerdata.openpa.pwrflow.FixedShuntCalcList
-
- getShuntCapacitors() - Method in class com.powerdata.openpa.Group
-
- getShuntCapacitors(int) - Method in class com.powerdata.openpa.GroupListI
-
return list of shunt capacitors
- getShuntCapacitors(int) - Method in interface com.powerdata.openpa.GroupListIfc
-
Get Shunt Capacitors contained in group
- getShuntCapacitors() - Method in interface com.powerdata.openpa.PALists
-
return list of shunt capacitors
- getShuntCapInsvc(ShuntCapList) - Static method in class com.powerdata.openpa.SubLists
-
- getShuntCapSublist(ShuntCapList, int[]) - Static method in class com.powerdata.openpa.SubLists
-
- getShuntReacInsvc(ShuntReacList) - Static method in class com.powerdata.openpa.SubLists
-
- getShuntReacSublist(ShuntReacList, int[]) - Static method in class com.powerdata.openpa.SubLists
-
- getShuntReactors() - Method in class com.powerdata.openpa.Group
-
- getShuntReactors(int) - Method in class com.powerdata.openpa.GroupListI
-
return list of shunt reactors
- getShuntReactors(int) - Method in interface com.powerdata.openpa.GroupListIfc
-
Get Shunt Reactors contained in group
- getShuntReactors() - Method in interface com.powerdata.openpa.PALists
-
return list of shunt reactors
- getSingleBus() - Method in interface com.powerdata.openpa.PAModel
-
get Single Bus view of nodes interconnected by closed switches
- getSlackActivationTolerance() - Method in class com.powerdata.openpa.pwrflow.FDPowerFlow
-
Get the slack activation tolerance.
- getSlope() - Method in class com.powerdata.openpa.SVC
-
get slope (kV/MVAr per-unit on largest magnitude admittance limit)
- getSlope(int) - Method in interface com.powerdata.openpa.SVCList
-
get slope (kV/MVAr per-cent on largest magnitude admittance limit)
- getSlope() - Method in interface com.powerdata.openpa.SVCList
-
get slope (kV/MVAr per-cent on largest magnitude admittance limit)
- getState(int) - Method in class com.powerdata.openpa.pwrflow.SVCCalcList
-
Get the calculated state of the SVC
- getState() - Method in class com.powerdata.openpa.pwrflow.SVCCalcList.SVCCalc
-
Get the calculated state of the SVC
- getState() - Method in class com.powerdata.openpa.Switch
-
- getState() - Method in enum com.powerdata.openpa.Switch.State
-
- getState(int) - Method in interface com.powerdata.openpa.SwitchList
-
- getState() - Method in interface com.powerdata.openpa.SwitchList
-
- getStateCount() - Method in class com.powerdata.openpa.se.BusStateMap
-
get the number of states
- getStation() - Method in class com.powerdata.openpa.Bus
-
- getStation(int) - Method in interface com.powerdata.openpa.BusList
-
- getStation() - Method in interface com.powerdata.openpa.BusList
-
- getStations() - Method in interface com.powerdata.openpa.PAModel
-
get Substations
- getStationSublist(StationList, int[]) - Static method in class com.powerdata.openpa.SubLists
-
- getStatus() - Method in class com.powerdata.openpa.pwrflow.CAWorker.Result
-
- getStatus() - Method in class com.powerdata.openpa.pwrflow.ConvergenceList.ConvergenceInfo
-
- getStatus() - Method in interface com.powerdata.openpa.pwrflow.Mismatch.WorstMM
-
- getStatusP() - Method in class com.powerdata.openpa.pwrflow.ConvergenceList.ConvergenceInfo
-
- getStatusQ() - Method in class com.powerdata.openpa.pwrflow.ConvergenceList.ConvergenceInfo
-
- getSteamSupply(int) - Method in interface com.powerdata.openpa.SteamTurbineList
-
Get Steam Supply
- getSteamTurbines() - Method in class com.powerdata.openpa.Group
-
- getSteamTurbines() - Method in interface com.powerdata.openpa.PALists
-
return list of Steam Turbines.
- getSVC(int) - Method in class com.powerdata.openpa.pwrflow.SVCCalcList
-
- getSVC() - Method in class com.powerdata.openpa.pwrflow.SVCCalcList.SVCCalc
-
Get the backing SVC object
- getSVCCalc() - Method in class com.powerdata.openpa.pwrflow.ACPowerCalc
-
return SVC calculator for SVC's modeled with positive slope
- getSVCInsvc(SVCList) - Static method in class com.powerdata.openpa.SubLists
-
- getSVCs() - Method in class com.powerdata.openpa.Group
-
- getSVCs(int) - Method in class com.powerdata.openpa.GroupListI
-
return list of SVC's
- getSVCs(int) - Method in interface com.powerdata.openpa.GroupListIfc
-
Get Static Var Compensators contained in group
- getSVCs() - Method in interface com.powerdata.openpa.PALists
-
return list of SVC's
- getSVCSublist(SVCList, int[]) - Static method in class com.powerdata.openpa.SubLists
-
- getSwitchedShunt() - Method in class com.powerdata.openpa.psseraw.PsseClassSet
-
- getSwitchedShunt() - Method in class com.powerdata.openpa.psseraw.PsseClassSetVersion29
-
- getSwitchedShunt() - Method in class com.powerdata.openpa.psseraw.PsseClassSetVersion30
-
- getSwitchedShuntInsvc(SwitchedShuntList) - Static method in class com.powerdata.openpa.SubLists
-
- getSwitchedShunts() - Method in interface com.powerdata.openpa.PAModel
-
return list of switched shunts
- getSwitchedShuntSublist(SwitchedShuntList, int[]) - Static method in class com.powerdata.openpa.SubLists
-
- getSwitches() - Method in class com.powerdata.openpa.Group
-
- getSwitches(int) - Method in class com.powerdata.openpa.GroupListI
-
return list of switches
- getSwitches(int) - Method in interface com.powerdata.openpa.GroupListIfc
-
Get Switches contained in group
- getSwitches() - Method in interface com.powerdata.openpa.PALists
-
return list of switches
- getSwitchSublist(SwitchList, int[]) - Static method in class com.powerdata.openpa.SubLists
-
- getSystemBaseMVA() - Method in class com.powerdata.openpa.psseraw.PsseHeader
-
- getTap(int, int) - Method in interface com.powerdata.openpa.ImpedanceCorrectionList
-
- getTap(int) - Method in interface com.powerdata.openpa.ImpedanceCorrectionList
-
- getTap() - Method in interface com.powerdata.openpa.ImpedanceCorrectionList
-
- getTap(int) - Method in class com.powerdata.openpa.ImpedanceCorrectionList.ImpedanceCorrection
-
- getTap() - Method in class com.powerdata.openpa.ImpedanceCorrectionList.ImpedanceCorrection
-
- getTapBus() - Method in class com.powerdata.openpa.Transformer
-
- getTapBus(int) - Method in interface com.powerdata.openpa.TransformerList
-
- getTapBus() - Method in interface com.powerdata.openpa.TransformerList
-
- getTestBuses(ElectricalIsland) - Method in class com.powerdata.openpa.pwrflow.Mismatch
-
Get the bus types configured for testing
- getToBchg() - Method in class com.powerdata.openpa.ACBranch
-
get to-side charging susceptance
- getToBchg(int) - Method in class com.powerdata.openpa.ACBranchList
-
- getToBchg() - Method in class com.powerdata.openpa.ACBranchList
-
- getToBchg(int) - Method in interface com.powerdata.openpa.ACBranchListIfc
-
- getToBchg() - Method in interface com.powerdata.openpa.ACBranchListIfc
-
- getToBchg(int) - Method in interface com.powerdata.openpa.LineList
-
- getToBchg() - Method in interface com.powerdata.openpa.LineList
-
- getToBus(int) - Method in class com.powerdata.openpa.ACBranchList
-
- getToBus() - Method in class com.powerdata.openpa.ACBranchList
-
- getToBus() - Method in class com.powerdata.openpa.BusRefIndex.TwoTerm
-
- getToBus(int) - Method in interface com.powerdata.openpa.TwoTermBaseList
-
- getToBus() - Method in interface com.powerdata.openpa.TwoTermBaseList.TwoTermBase
-
get to-side bus
- getToBus() - Method in class com.powerdata.openpa.TwoTermDev
-
- getToBus(int) - Method in class com.powerdata.openpa.TwoTermDevList
-
- getToBus() - Method in class com.powerdata.openpa.TwoTermDevList
-
- getToBus() - Method in interface com.powerdata.openpa.TwoTermDevListIfc
-
- getToBusIndexes() - Method in interface com.powerdata.openpa.TwoTermDevListIfc
-
- getTokens() - Method in class com.powerdata.openpa.tools.StringParse
-
- getToMaxTap() - Method in class com.powerdata.openpa.Transformer
-
- getToMaxTap(int) - Method in interface com.powerdata.openpa.TransformerList
-
- getToMaxTap() - Method in interface com.powerdata.openpa.TransformerList
-
- getToMinTap() - Method in class com.powerdata.openpa.Transformer
-
- getToMinTap(int) - Method in interface com.powerdata.openpa.TransformerList
-
- getToMinTap() - Method in interface com.powerdata.openpa.TransformerList
-
- getToMutual() - Method in class com.powerdata.openpa.pwrflow.ACBranchJacobianList.ACBranchJacobian
-
get partial derivatives of to-side power with respect to from-side voltage
- getToMutual(int) - Method in class com.powerdata.openpa.pwrflow.ACBranchJacobianList
-
get partial derivatives of to-side power with respect to from-side voltage
- getToP(int) - Method in class com.powerdata.openpa.ACBranchList
-
- getToP() - Method in class com.powerdata.openpa.ACBranchList
-
- getToP() - Method in class com.powerdata.openpa.TwoTermDev
-
to-side active power (MW)
- getToP(int) - Method in class com.powerdata.openpa.TwoTermDevList
-
- getToP() - Method in class com.powerdata.openpa.TwoTermDevList
-
- getToP(int) - Method in interface com.powerdata.openpa.TwoTermDevListIfc
-
- getToP() - Method in interface com.powerdata.openpa.TwoTermDevListIfc
-
- getToQ(int) - Method in class com.powerdata.openpa.ACBranchList
-
- getToQ() - Method in class com.powerdata.openpa.ACBranchList
-
- getToQ() - Method in class com.powerdata.openpa.TwoTermDev
-
to-side reactive power (MVAr)
- getToQ(int) - Method in class com.powerdata.openpa.TwoTermDevList
-
- getToQ() - Method in class com.powerdata.openpa.TwoTermDevList
-
- getToQ(int) - Method in interface com.powerdata.openpa.TwoTermDevListIfc
-
- getToQ() - Method in interface com.powerdata.openpa.TwoTermDevListIfc
-
- getToSelf() - Method in class com.powerdata.openpa.pwrflow.ACBranchJacobianList.ACBranchJacobian
-
get partial derivatives of to-side power with respect to to-side voltage
- getToSelf(int) - Method in class com.powerdata.openpa.pwrflow.ACBranchJacobianList
-
get partial derivatives of to-side power with respect to to-side voltage
- getToSelfB() - Method in interface com.powerdata.openpa.pwrflow.BMtrxElemBldr.BMtrxElem
-
Deprecated.
- getToSidePower() - Method in class com.powerdata.openpa.pwrflow.ACBranchFlows.ACBranchFlow
-
- getToSidePower() - Method in class com.powerdata.openpa.pwrflow.ACBranchFlows
-
Returns the to-side power of each branch per-unit on 100 MVA base
- getToSidePower(int) - Method in class com.powerdata.openpa.pwrflow.ACBranchFlows
-
Get calculated power on the "from-side" of the branch
- getToStepSize() - Method in class com.powerdata.openpa.Transformer
-
- getToStepSize(int) - Method in interface com.powerdata.openpa.TransformerList
-
- getToStepSize() - Method in interface com.powerdata.openpa.TransformerList
-
- getToTap() - Method in class com.powerdata.openpa.ACBranch
-
get to-side off-nominal tap ratio p.u on 100MVA base and bus base KV
- getToTap(int) - Method in class com.powerdata.openpa.ACBranchList
-
- getToTap() - Method in class com.powerdata.openpa.ACBranchList
-
- getToTap(int) - Method in interface com.powerdata.openpa.ACBranchListIfc
-
- getToTap() - Method in interface com.powerdata.openpa.ACBranchListIfc
-
- getTransferB() - Method in interface com.powerdata.openpa.pwrflow.BMtrxElemBldr.BMtrxElem
-
Deprecated.
- getTransformer() - Method in class com.powerdata.openpa.psseraw.PsseClassSet
-
- getTransformer() - Method in class com.powerdata.openpa.psseraw.PsseClassSetVersion29
-
- getTransformer() - Method in class com.powerdata.openpa.psseraw.PsseClassSetVersion30
-
- getTransformerInsvc(TransformerList) - Static method in class com.powerdata.openpa.SubLists
-
- getTransformers() - Method in class com.powerdata.openpa.Group
-
- getTransformers(int) - Method in class com.powerdata.openpa.GroupListI
-
return list of transformers
- getTransformers(int) - Method in interface com.powerdata.openpa.GroupListIfc
-
Get Transformers contained in group
- getTransformers() - Method in interface com.powerdata.openpa.PALists
-
return list of transformers
- getTransformerSublist(TransformerList, int[]) - Static method in class com.powerdata.openpa.SubLists
-
- getTransitTime() - Method in class com.powerdata.openpa.Switch
-
- getTransitTime(int) - Method in interface com.powerdata.openpa.SwitchList
-
- getTransitTime() - Method in interface com.powerdata.openpa.SwitchList
-
- getTwoTermDCLine() - Method in class com.powerdata.openpa.psseraw.PsseClassSet
-
- getTwoTermDCLine() - Method in class com.powerdata.openpa.psseraw.PsseClassSetVersion29
-
- getTwoTermDCLineInsvc(TwoTermDCLineList) - Static method in class com.powerdata.openpa.SubLists
-
- getTwoTermDCLines() - Method in class com.powerdata.openpa.Group
-
- getTwoTermDCLines(int) - Method in class com.powerdata.openpa.GroupListI
-
return list of two-terminal DC Lines
- getTwoTermDCLines(int) - Method in interface com.powerdata.openpa.GroupListIfc
-
Get Two-Terminal DC Lines contained in group
- getTwoTermDCLines() - Method in interface com.powerdata.openpa.PALists
-
return list of two-terminal DC Lines.
- getTwoTermDCLineSublist(TwoTermDCLineList, int[]) - Static method in class com.powerdata.openpa.SubLists
-
- getTwoTermDevices() - Method in class com.powerdata.openpa.Group
-
- getTwoTermDevices() - Method in interface com.powerdata.openpa.PALists
-
get all two-terminal devices
- getTxImpedanceCorrection() - Method in class com.powerdata.openpa.psseraw.PsseClassSet
-
- getTxImpedanceCorrection() - Method in class com.powerdata.openpa.psseraw.PsseClassSetVersion29
-
- getType() - Method in class com.powerdata.openpa.Gen
-
- getType(int) - Method in interface com.powerdata.openpa.GenList
-
- getType() - Method in interface com.powerdata.openpa.GenList
-
- getType() - Method in class com.powerdata.openpa.psseraw.PsseField
-
- getType(int) - Method in class com.powerdata.openpa.pwrflow.BusTypeUtil
-
- GetType(BaseObject) - Static method in class com.powerdata.openpa.tools.EqType
-
- getTypes() - Method in class com.powerdata.openpa.pwrflow.BusTypeUtil
-
- getTypesOrdinal() - Method in class com.powerdata.openpa.pwrflow.BusTypeUtil
-
- getUnitActiveLimitTolerance() - Method in class com.powerdata.openpa.pwrflow.FDPowerFlow
-
Get the unit active limit tolerance.
- getUnitRegOverride() - Method in class com.powerdata.openpa.PflowModelBuilder
-
ignore case unit setpoints, and substitute case voltage at unit terminal
bus
- getUnits() - Method in class com.powerdata.openpa.pwrflow.CAWorker.Result
-
- getVA() - Method in class com.powerdata.openpa.Bus
-
get voltage angle in degrees
- getVA(int) - Method in interface com.powerdata.openpa.BusList
-
- getVA() - Method in interface com.powerdata.openpa.BusList
-
- getVal(int) - Method in class com.powerdata.openpa.tools.QueryString
-
- getValue() - Method in class com.powerdata.openpa.pwrflow.CAWorker.Result
-
- getValue() - Method in interface com.powerdata.openpa.pwrflow.Mismatch.WorstMM
-
- getValue(int, int) - Method in class com.powerdata.openpa.tools.matrix.ArrayJacobianMatrix
-
- getValue(int, int) - Method in class com.powerdata.openpa.tools.matrix.FloatArrayMatrix
-
- getValue(int, int) - Method in interface com.powerdata.openpa.tools.matrix.FloatMatrix
-
Get a value
- getValue(int, int) - Method in interface com.powerdata.openpa.tools.matrix.Matrix
-
Get a value
- getValue(int, int) - Method in class com.powerdata.openpa.tools.matrix.SpSymFltMatrix
-
- getVersion() - Method in class com.powerdata.openpa.psseraw.PsseHeader
-
- getVersion() - Method in enum com.powerdata.openpa.tools.psmfmt.CaseGeneratingUnit
-
- getVersion() - Method in enum com.powerdata.openpa.tools.psmfmt.CaseLine
-
- getVersion() - Method in enum com.powerdata.openpa.tools.psmfmt.CaseLoad
-
- getVersion() - Method in enum com.powerdata.openpa.tools.psmfmt.CaseNode
-
- getVersion() - Method in enum com.powerdata.openpa.tools.psmfmt.CasePhaseTapChanger
-
- getVersion() - Method in enum com.powerdata.openpa.tools.psmfmt.CaseRatioTapChanger
-
- getVersion() - Method in enum com.powerdata.openpa.tools.psmfmt.CaseSeriesCapacitor
-
- getVersion() - Method in enum com.powerdata.openpa.tools.psmfmt.CaseSeriesReactor
-
- getVersion() - Method in enum com.powerdata.openpa.tools.psmfmt.CaseSVC
-
- getVersion() - Method in enum com.powerdata.openpa.tools.psmfmt.CaseSwitch
-
- getVersion() - Method in enum com.powerdata.openpa.tools.psmfmt.CaseSynchronousMachine
-
- getVersion() - Method in enum com.powerdata.openpa.tools.psmfmt.CaseTransformerWinding
-
- getVersion() - Method in enum com.powerdata.openpa.tools.psmfmt.ControlArea
-
- getVersion() - Method in enum com.powerdata.openpa.tools.psmfmt.GeneratingUnit
-
- getVersion() - Method in enum com.powerdata.openpa.tools.psmfmt.ImpedanceCorrection
-
- getVersion() - Method in enum com.powerdata.openpa.tools.psmfmt.Line
-
- getVersion() - Method in enum com.powerdata.openpa.tools.psmfmt.Load
-
- getVersion() - Method in enum com.powerdata.openpa.tools.psmfmt.ModelParameter
-
- getVersion() - Method in enum com.powerdata.openpa.tools.psmfmt.Node
-
- getVersion() - Method in enum com.powerdata.openpa.tools.psmfmt.Organization
-
- getVersion() - Method in enum com.powerdata.openpa.tools.psmfmt.PhaseTapChanger
-
- getVersion() - Method in enum com.powerdata.openpa.tools.psmfmt.PrimeMover
-
- getVersion() - Method in enum com.powerdata.openpa.tools.psmfmt.PsmCaseFmtObject
-
- getVersion() - Method in enum com.powerdata.openpa.tools.psmfmt.PsmMdlFmtObject
-
- GetVersion() - Static method in enum com.powerdata.openpa.tools.psmfmt.PsmMdlFmtObject
-
- getVersion() - Method in enum com.powerdata.openpa.tools.psmfmt.RatioTapChanger
-
- getVersion() - Method in enum com.powerdata.openpa.tools.psmfmt.ReactiveCapabilityCurve
-
- getVersion() - Method in enum com.powerdata.openpa.tools.psmfmt.SeriesCapacitor
-
- getVersion() - Method in enum com.powerdata.openpa.tools.psmfmt.SeriesReactor
-
- getVersion() - Method in enum com.powerdata.openpa.tools.psmfmt.ShuntCapacitor
-
- getVersion() - Method in enum com.powerdata.openpa.tools.psmfmt.ShuntReactor
-
- getVersion() - Method in enum com.powerdata.openpa.tools.psmfmt.Substation
-
- getVersion() - Method in enum com.powerdata.openpa.tools.psmfmt.SVC
-
- getVersion() - Method in enum com.powerdata.openpa.tools.psmfmt.Switch
-
- getVersion() - Method in enum com.powerdata.openpa.tools.psmfmt.SwitchType
-
- getVersion() - Method in enum com.powerdata.openpa.tools.psmfmt.SynchronousMachine
-
- getVersion() - Method in enum com.powerdata.openpa.tools.psmfmt.Transformer
-
- getVersion() - Method in enum com.powerdata.openpa.tools.psmfmt.TransformerWinding
-
- getVersionMajor() - Method in class com.powerdata.openpa.psseraw.PsseClassSet
-
- getVersionMajor() - Method in class com.powerdata.openpa.psseraw.PsseClassSetVersion29
-
- getVersionMajor() - Method in class com.powerdata.openpa.psseraw.PsseClassSetVersion30
-
- getVersionMajor() - Method in class com.powerdata.openpa.psseraw.PsseClassSetVersion33
-
- getVM() - Method in class com.powerdata.openpa.Bus
-
get voltage magnitude in kV
- getVM(int) - Method in interface com.powerdata.openpa.BusList
-
- getVM() - Method in interface com.powerdata.openpa.BusList
-
- getVM() - Method in interface com.powerdata.openpa.pwrflow.ConvergenceList.WorstVoltage
-
- getVoltageLevel() - Method in class com.powerdata.openpa.Bus
-
- getVoltageLevel(int) - Method in interface com.powerdata.openpa.BusList
-
- getVoltageLevel() - Method in interface com.powerdata.openpa.BusList
-
- getVoltageLevels() - Method in interface com.powerdata.openpa.PAModel
-
get Voltage Levels
- getVoltageLevelSublist(VoltageLevelList, int[]) - Static method in class com.powerdata.openpa.SubLists
-
- getVoltageViolations(Set<ElectricalIsland>) - Method in class com.powerdata.openpa.pwrflow.CAWorker
-
- getVS() - Method in class com.powerdata.openpa.Gen
-
voltage setpoint in KV, used if regulating voltage
- getVS(int) - Method in interface com.powerdata.openpa.GenList
-
- getVS() - Method in interface com.powerdata.openpa.GenList
-
- getVS() - Method in interface com.powerdata.openpa.pwrflow.VoltageSetPoint.SetPoint
-
- getVS() - Method in class com.powerdata.openpa.SVC
-
voltage setpoint in KV, used if regulating voltage
- getVS(int) - Method in interface com.powerdata.openpa.SVCList
-
- getVS() - Method in interface com.powerdata.openpa.SVCList
-
- getVSC_DCLine() - Method in class com.powerdata.openpa.psseraw.PsseClassSet
-
- getVSC_DCLine() - Method in class com.powerdata.openpa.psseraw.PsseClassSetVersion29
-
- getWindingImpedance(int) - Method in class com.powerdata.openpa.psseraw.PsseRepository
-
- getWorstP() - Method in class com.powerdata.openpa.pwrflow.ConvergenceList.ConvergenceInfo
-
- getWorstQ() - Method in class com.powerdata.openpa.pwrflow.ConvergenceList.ConvergenceInfo
-
- getWorstVoltage() - Method in class com.powerdata.openpa.pwrflow.ConvergenceList.ConvergenceInfo
-
- getX() - Method in class com.powerdata.openpa.ACBranch
-
get reactance p.u.
- getX(int) - Method in class com.powerdata.openpa.ACBranchList
-
- getX() - Method in class com.powerdata.openpa.ACBranchList
-
- getX(int) - Method in interface com.powerdata.openpa.ACBranchListIfc
-
- getX() - Method in interface com.powerdata.openpa.ACBranchListIfc
-
- getY() - Method in class com.powerdata.openpa.pwrflow.ACBranchExtList.ACBranchExt
-
- getY(int) - Method in class com.powerdata.openpa.pwrflow.ACBranchExtList
-
Return branch admittance on system (100MVA) base
- getZ1() - Method in class com.powerdata.openpa.tools.StarNetwork
-
- getZ12() - Method in class com.powerdata.openpa.tools.DeltaNetwork
-
- getZ2() - Method in class com.powerdata.openpa.tools.StarNetwork
-
- getZ23() - Method in class com.powerdata.openpa.tools.DeltaNetwork
-
- getZ3() - Method in class com.powerdata.openpa.tools.StarNetwork
-
- getZ31() - Method in class com.powerdata.openpa.tools.DeltaNetwork
-
- getZone() - Method in class com.powerdata.openpa.psseraw.PsseClassSet
-
- getZone() - Method in class com.powerdata.openpa.psseraw.PsseClassSetVersion29
-
- Group - Class in com.powerdata.openpa
-
- Group(GroupListIfc<? extends Group>, int) - Constructor for class com.powerdata.openpa.Group
-
- GroupIndex - Interface in com.powerdata.openpa
-
Partition buses into groupings
- GroupList - Class in com.powerdata.openpa
-
Anonymous GroupList.
- GroupList(PALists, GroupIndex) - Constructor for class com.powerdata.openpa.GroupList
-
Create an anonymous GroupList
- GroupList(PALists, int[], GroupIndex) - Constructor for class com.powerdata.openpa.GroupList
-
Create an anonymous GroupList with a set of known keys
- GroupListI<T extends Group> - Class in com.powerdata.openpa
-
- GroupListIfc<T extends Group> - Interface in com.powerdata.openpa
-
- save(String) - Method in class com.powerdata.openpa.tools.SimpleCSV
-
- save(OutputStream) - Method in class com.powerdata.openpa.tools.SimpleCSV
-
- save(PrintWriter) - Method in class com.powerdata.openpa.tools.SimpleCSV
-
- SeriesCap - Class in com.powerdata.openpa
-
- SeriesCap(SeriesCapList, int) - Constructor for class com.powerdata.openpa.SeriesCap
-
- SeriesCapacitor - Enum in com.powerdata.openpa.tools.psmfmt
-
- SeriesCapacitorOPA - Class in com.powerdata.openpa.tools.psmfmt
-
- SeriesCapacitorOPA(PAModel, BusRefIndex) - Constructor for class com.powerdata.openpa.tools.psmfmt.SeriesCapacitorOPA
-
- SeriesCapList - Interface in com.powerdata.openpa
-
- SeriesCapList.ListAccess<R> - Interface in com.powerdata.openpa
-
- SeriesReac - Class in com.powerdata.openpa
-
- SeriesReac(SeriesReacList, int) - Constructor for class com.powerdata.openpa.SeriesReac
-
- SeriesReacList - Interface in com.powerdata.openpa
-
- SeriesReacList.ListAccess<R> - Interface in com.powerdata.openpa
-
- SeriesReactor - Enum in com.powerdata.openpa.tools.psmfmt
-
- SeriesReactorOPA - Class in com.powerdata.openpa.tools.psmfmt
-
- SeriesReactorOPA(PAModel, BusRefIndex) - Constructor for class com.powerdata.openpa.tools.psmfmt.SeriesReactorOPA
-
- set(int, Complex) - Method in class com.powerdata.openpa.tools.ComplexList
-
- set(int, JacobianElement) - Method in class com.powerdata.openpa.tools.matrix.JacobianArrayList
-
- set(int, PComplex) - Method in class com.powerdata.openpa.tools.PComplexList
-
- set(int, int, String) - Method in class com.powerdata.openpa.tools.SimpleCSV
-
- set(int, int, byte) - Method in class com.powerdata.openpa.tools.SimpleCSV
-
- set(int, int, short) - Method in class com.powerdata.openpa.tools.SimpleCSV
-
- set(int, int, int) - Method in class com.powerdata.openpa.tools.SimpleCSV
-
- set(int, int, long) - Method in class com.powerdata.openpa.tools.SimpleCSV
-
- set(int, int, float) - Method in class com.powerdata.openpa.tools.SimpleCSV
-
- set(int, int, double) - Method in class com.powerdata.openpa.tools.SimpleCSV
-
- set(String, int, String) - Method in class com.powerdata.openpa.tools.SimpleCSV
-
- set(String, int, byte) - Method in class com.powerdata.openpa.tools.SimpleCSV
-
- set(String, int, short) - Method in class com.powerdata.openpa.tools.SimpleCSV
-
- set(String, int, int) - Method in class com.powerdata.openpa.tools.SimpleCSV
-
- set(String, int, long) - Method in class com.powerdata.openpa.tools.SimpleCSV
-
- set(String, int, float) - Method in class com.powerdata.openpa.tools.SimpleCSV
-
- set(String, int, double) - Method in class com.powerdata.openpa.tools.SimpleCSV
-
- setArea(Area) - Method in class com.powerdata.openpa.Bus
-
- setArea(int, Area) - Method in interface com.powerdata.openpa.BusList
-
- setArea(Area[]) - Method in interface com.powerdata.openpa.BusList
-
- setB(float) - Method in class com.powerdata.openpa.FixedShunt
-
set shunt admittance in MVAr @ unity bus voltage
- setB(int, float) - Method in class com.powerdata.openpa.FixedShuntList
-
- setB(float[]) - Method in class com.powerdata.openpa.FixedShuntList
-
- setB(int, float) - Method in interface com.powerdata.openpa.FixedShuntListIfc
-
- setB(float[]) - Method in interface com.powerdata.openpa.FixedShuntListIfc
-
- setBaseKV(float) - Method in class com.powerdata.openpa.VoltageLevel
-
- setBaseKV(int, float) - Method in interface com.powerdata.openpa.VoltageLevelList
-
- setBaseKV(float[]) - Method in interface com.powerdata.openpa.VoltageLevelList
-
- setBmag(float) - Method in class com.powerdata.openpa.ACBranch
-
set transformer magnetizing susceptance p.u.
- setBmag(int, float) - Method in class com.powerdata.openpa.ACBranchList
-
- setBmag(float[]) - Method in class com.powerdata.openpa.ACBranchList
-
- setBmag(int, float) - Method in interface com.powerdata.openpa.ACBranchListIfc
-
- setBmag(float[]) - Method in interface com.powerdata.openpa.ACBranchListIfc
-
- setBus(int, Bus) - Method in class com.powerdata.openpa.FixedShuntList
-
- setBus(Bus[]) - Method in class com.powerdata.openpa.FixedShuntList
-
- setBus(int, Bus) - Method in class com.powerdata.openpa.OneTermDevList
-
- setBus(Bus[]) - Method in class com.powerdata.openpa.OneTermDevList
-
- setBus(int, Bus) - Method in interface com.powerdata.openpa.OneTermDevListIfc
-
- setBus(Bus[]) - Method in interface com.powerdata.openpa.OneTermDevListIfc
-
- setControlMode(PhaseShifter.ControlMode) - Method in class com.powerdata.openpa.PhaseShifter
-
- setControlMode(int, PhaseShifter.ControlMode) - Method in interface com.powerdata.openpa.PhaseShifterList
-
set the phase shifter control mode
- setControlMode(PhaseShifter.ControlMode[]) - Method in interface com.powerdata.openpa.PhaseShifterList
-
set the phase shifter control modes
- setConvergenceTolerance(float) - Method in class com.powerdata.openpa.se.StateEstimator
-
Set convergence tolerance
- setCovergenceTolerance(float) - Method in class com.powerdata.openpa.pwrflow.FDPowerFlow
-
Set the convergence tolerance for both active and reactive mismatches.
- setDpda(int, float) - Method in class com.powerdata.openpa.tools.matrix.JacobianArrayList
-
- setDpda(float) - Method in class com.powerdata.openpa.tools.matrix.JacobianElement.JacobianElementContainer
-
- setDpda(float) - Method in interface com.powerdata.openpa.tools.matrix.JacobianElement
-
set the partial derivative of active power with respect to voltage angle
- setDpda(float) - Method in class com.powerdata.openpa.tools.matrix.JacobianList.Element
-
- setDpda(int, float) - Method in interface com.powerdata.openpa.tools.matrix.JacobianList
-
set the partial derivative of active power with respect to voltage angle
- setDpda(float) - Method in class com.powerdata.openpa.tools.matrix.JacobianMatrix.Element
-
- setDpda(int, int, float) - Method in interface com.powerdata.openpa.tools.matrix.JacobianMatrix
-
set the partial derivative of active power with respect to voltage angle
- setDpdv(int, float) - Method in class com.powerdata.openpa.tools.matrix.JacobianArrayList
-
- setDpdv(float) - Method in class com.powerdata.openpa.tools.matrix.JacobianElement.JacobianElementContainer
-
- setDpdv(float) - Method in interface com.powerdata.openpa.tools.matrix.JacobianElement
-
set the partial derivative of active power with respect to voltage magnitude
- setDpdv(float) - Method in class com.powerdata.openpa.tools.matrix.JacobianList.Element
-
- setDpdv(int, float) - Method in interface com.powerdata.openpa.tools.matrix.JacobianList
-
set the partial derivative of active power with respect to voltage magnitude
- setDpdv(float) - Method in class com.powerdata.openpa.tools.matrix.JacobianMatrix.Element
-
- setDpdv(int, int, float) - Method in interface com.powerdata.openpa.tools.matrix.JacobianMatrix
-
set the partial derivative of active power with respect to voltage magnitude
- setDqda(int, float) - Method in class com.powerdata.openpa.tools.matrix.JacobianArrayList
-
- setDqda(float) - Method in class com.powerdata.openpa.tools.matrix.JacobianElement.JacobianElementContainer
-
- setDqda(float) - Method in interface com.powerdata.openpa.tools.matrix.JacobianElement
-
set the partial derivative of reactive power with respect to voltage angle
- setDqda(float) - Method in class com.powerdata.openpa.tools.matrix.JacobianList.Element
-
- setDqda(int, float) - Method in interface com.powerdata.openpa.tools.matrix.JacobianList
-
set the partial derivative of reactive power with respect to voltage angle
- setDqda(float) - Method in class com.powerdata.openpa.tools.matrix.JacobianMatrix.Element
-
- setDqda(int, int, float) - Method in interface com.powerdata.openpa.tools.matrix.JacobianMatrix
-
set the partial derivative of reactive power with respect to voltage angle
- setDqdv(int, float) - Method in class com.powerdata.openpa.tools.matrix.JacobianArrayList
-
- setDqdv(float) - Method in class com.powerdata.openpa.tools.matrix.JacobianElement.JacobianElementContainer
-
- setDqdv(float) - Method in interface com.powerdata.openpa.tools.matrix.JacobianElement
-
set the partial derivative of reactive power with respect to voltage magnitude
- setDqdv(float) - Method in class com.powerdata.openpa.tools.matrix.JacobianList.Element
-
- setDqdv(int, float) - Method in interface com.powerdata.openpa.tools.matrix.JacobianList
-
set the partial derivative of reactive power with respect to voltage magnitude
- setDqdv(float) - Method in class com.powerdata.openpa.tools.matrix.JacobianMatrix.Element
-
- setDqdv(int, int, float) - Method in interface com.powerdata.openpa.tools.matrix.JacobianMatrix
-
set the partial derivative of reactive power with respect to voltage magnitude
- setEnabled(boolean) - Method in class com.powerdata.openpa.Switch
-
- setEnabled(int, boolean) - Method in interface com.powerdata.openpa.SwitchList
-
- setEnabled(boolean[]) - Method in interface com.powerdata.openpa.SwitchList
-
- setFirst(int) - Method in class com.powerdata.openpa.ImpedanceCorrectionList.ImpedanceCorrectionData
-
- setFreq(float) - Method in class com.powerdata.openpa.ElectricalIsland
-
- setFreq(int, float) - Method in interface com.powerdata.openpa.ElectricalIslandList
-
- setFreq(float[]) - Method in interface com.powerdata.openpa.ElectricalIslandList
-
- setFreqSrcPri(int) - Method in class com.powerdata.openpa.Bus
-
- setFreqSrcPri(int, int) - Method in interface com.powerdata.openpa.BusList
-
- setFreqSrcPri(int[]) - Method in interface com.powerdata.openpa.BusList
-
- setFrequency(float) - Method in class com.powerdata.openpa.tools.psmfmt.PsmFmtExport
-
- setFromBchg(float) - Method in class com.powerdata.openpa.ACBranch
-
set from-side charging susceptance
- setFromBchg(int, float) - Method in class com.powerdata.openpa.ACBranchList
-
- setFromBchg(float[]) - Method in class com.powerdata.openpa.ACBranchList
-
- setFromBchg(int, float) - Method in interface com.powerdata.openpa.ACBranchListIfc
-
- setFromBchg(float[]) - Method in interface com.powerdata.openpa.ACBranchListIfc
-
- setFromBchg(int, float) - Method in interface com.powerdata.openpa.LineList
-
- setFromBchg(float[]) - Method in interface com.powerdata.openpa.LineList
-
- setFromBus(int, Bus) - Method in class com.powerdata.openpa.ACBranchList
-
- setFromBus(Bus[]) - Method in class com.powerdata.openpa.ACBranchList
-
- setFromBus(int, Bus) - Method in class com.powerdata.openpa.TwoTermDevList
-
- setFromBus(Bus[]) - Method in class com.powerdata.openpa.TwoTermDevList
-
- setFromBus(int, Bus) - Method in interface com.powerdata.openpa.TwoTermDevListIfc
-
- setFromBus(Bus[]) - Method in interface com.powerdata.openpa.TwoTermDevListIfc
-
- setFromMaxTap(float) - Method in class com.powerdata.openpa.Transformer
-
- setFromMaxTap(int, float) - Method in interface com.powerdata.openpa.TransformerList
-
- setFromMaxTap(float[]) - Method in interface com.powerdata.openpa.TransformerList
-
- setFromMinTap(float) - Method in class com.powerdata.openpa.Transformer
-
- setFromMinTap(int, float) - Method in interface com.powerdata.openpa.TransformerList
-
- setFromMinTap(float[]) - Method in interface com.powerdata.openpa.TransformerList
-
- setFromP(int, float) - Method in class com.powerdata.openpa.ACBranchList
-
- setFromP(float[]) - Method in class com.powerdata.openpa.ACBranchList
-
- setFromP(float) - Method in class com.powerdata.openpa.TwoTermDev
-
from-side active power (MW)
- setFromP(int, float) - Method in class com.powerdata.openpa.TwoTermDevList
-
- setFromP(float[]) - Method in class com.powerdata.openpa.TwoTermDevList
-
- setFromP(int, float) - Method in interface com.powerdata.openpa.TwoTermDevListIfc
-
- setFromP(float[]) - Method in interface com.powerdata.openpa.TwoTermDevListIfc
-
- setFromQ(int, float) - Method in class com.powerdata.openpa.ACBranchList
-
- setFromQ(float[]) - Method in class com.powerdata.openpa.ACBranchList
-
- setFromQ(float) - Method in class com.powerdata.openpa.TwoTermDev
-
from-side reactive power (MVAr)
- setFromQ(int, float) - Method in class com.powerdata.openpa.TwoTermDevList
-
- setFromQ(float[]) - Method in class com.powerdata.openpa.TwoTermDevList
-
- setFromQ(int, float) - Method in interface com.powerdata.openpa.TwoTermDevListIfc
-
- setFromQ(float[]) - Method in interface com.powerdata.openpa.TwoTermDevListIfc
-
- setFromStepSize(float) - Method in class com.powerdata.openpa.Transformer
-
- setFromStepSize(int, float) - Method in interface com.powerdata.openpa.TransformerList
-
- setFromStepSize(float[]) - Method in interface com.powerdata.openpa.TransformerList
-
- setFromTap(float) - Method in class com.powerdata.openpa.ACBranch
-
set from-side off-nominal tap ratio p.u.
- setFromTap(int, float) - Method in class com.powerdata.openpa.ACBranchList
-
- setFromTap(float[]) - Method in class com.powerdata.openpa.ACBranchList
-
- setFromTap(int, float) - Method in interface com.powerdata.openpa.ACBranchListIfc
-
- setFromTap(float[]) - Method in interface com.powerdata.openpa.ACBranchListIfc
-
- setGmag(float) - Method in class com.powerdata.openpa.ACBranch
-
set transformer magnetizing conductance p.u.
- setGmag(int, float) - Method in class com.powerdata.openpa.ACBranchList
-
- setGmag(float[]) - Method in class com.powerdata.openpa.ACBranchList
-
- setGmag(int, float) - Method in interface com.powerdata.openpa.ACBranchListIfc
-
- setGmag(float[]) - Method in interface com.powerdata.openpa.ACBranchListIfc
-
- setHasLTC(boolean) - Method in class com.powerdata.openpa.Transformer
-
- setHasLTC(int, boolean) - Method in interface com.powerdata.openpa.TransformerList
-
- setHasLTC(boolean[]) - Method in interface com.powerdata.openpa.TransformerList
-
- setHeader(String[]) - Method in class com.powerdata.openpa.tools.SimpleCSV
-
- setID(String) - Method in class com.powerdata.openpa.AbstractBaseObject
-
- setID(String[]) - Method in class com.powerdata.openpa.ACBranchList
-
- setID(int, String) - Method in class com.powerdata.openpa.ACBranchList
-
- setID(String[]) - Method in interface com.powerdata.openpa.BaseList
-
set unique object ID PAModelException
- setID(int, String) - Method in interface com.powerdata.openpa.BaseList
-
- setID(String) - Method in interface com.powerdata.openpa.BaseObject
-
set unique String object identifier
- setID(String[]) - Method in class com.powerdata.openpa.FixedShuntList
-
- setID(int, String) - Method in class com.powerdata.openpa.FixedShuntList
-
- setID(String[]) - Method in class com.powerdata.openpa.OneTermDevList
-
- setID(int, String) - Method in class com.powerdata.openpa.OneTermDevList
-
- setID(String[]) - Method in class com.powerdata.openpa.TwoTermDevList
-
- setID(int, String) - Method in class com.powerdata.openpa.TwoTermDevList
-
- setIgnoreRatings(boolean) - Method in class com.powerdata.openpa.pwrflow.BasicContingencyManager
-
- setInService(int, boolean) - Method in class com.powerdata.openpa.ACBranchList
-
- setInService(boolean[]) - Method in class com.powerdata.openpa.ACBranchList
-
- setInService(int, boolean) - Method in class com.powerdata.openpa.FixedShuntList
-
- setInService(boolean[]) - Method in class com.powerdata.openpa.FixedShuntList
-
- setInService(boolean) - Method in class com.powerdata.openpa.InService
-
set device in/out of service
- setInService(int, boolean) - Method in interface com.powerdata.openpa.InServiceList
-
- setInService(boolean[]) - Method in interface com.powerdata.openpa.InServiceList
-
- setInService(int, boolean) - Method in class com.powerdata.openpa.OneTermDevList
-
- setInService(boolean[]) - Method in class com.powerdata.openpa.OneTermDevList
-
- setInService(int, boolean) - Method in class com.powerdata.openpa.TwoTermDevList
-
- setInService(boolean[]) - Method in class com.powerdata.openpa.TwoTermDevList
-
- setLast(int) - Method in class com.powerdata.openpa.ImpedanceCorrectionList.ImpedanceCorrectionData
-
- setLeastX(float) - Method in class com.powerdata.openpa.PflowModelBuilder
-
limit the branch reactance minimum magnitude, abs(X) > minx, defaults to
0 (no limit)
- setLTRating(float) - Method in class com.powerdata.openpa.ACBranch
-
set long-term branch rating MVA
- setLTRating(int, float) - Method in class com.powerdata.openpa.ACBranchList
-
- setLTRating(float[]) - Method in class com.powerdata.openpa.ACBranchList
-
- setLTRating(int, float) - Method in interface com.powerdata.openpa.ACBranchListIfc
-
- setLTRating(float[]) - Method in interface com.powerdata.openpa.ACBranchListIfc
-
- setMaxAng(float) - Method in class com.powerdata.openpa.PhaseShifter
-
- setMaxAng(int, float) - Method in interface com.powerdata.openpa.PhaseShifterList
-
- setMaxAng(float[]) - Method in interface com.powerdata.openpa.PhaseShifterList
-
- setMaxIterations(int) - Method in class com.powerdata.openpa.pwrflow.FDPowerFlow
-
Set maximum iterations (both active and reactive).
- setMaxIterations(int) - Method in class com.powerdata.openpa.se.StateEstimator
-
Set the maximum number of iterations
- setMaxKV(float) - Method in class com.powerdata.openpa.Transformer
-
- setMaxKV(int, float) - Method in interface com.powerdata.openpa.TransformerList
-
- setMaxKV(float[]) - Method in interface com.powerdata.openpa.TransformerList
-
- setMaxP(float) - Method in class com.powerdata.openpa.Load
-
Set Max Load MW
- setMaxP(int, float) - Method in interface com.powerdata.openpa.LoadList
-
- setMaxP(float[]) - Method in interface com.powerdata.openpa.LoadList
-
- setMaxQ(float) - Method in class com.powerdata.openpa.Gen
-
Maximum generator reactive power output (MVAr)
- setMaxQ(int, float) - Method in interface com.powerdata.openpa.GenList
-
- setMaxQ(float[]) - Method in interface com.powerdata.openpa.GenList
-
- setMaxQ(float) - Method in class com.powerdata.openpa.Load
-
Set Max Load MVAr
- setMaxQ(int, float) - Method in interface com.powerdata.openpa.LoadList
-
- setMaxQ(float[]) - Method in interface com.powerdata.openpa.LoadList
-
- setMaxQ(float) - Method in class com.powerdata.openpa.SVC
-
set maximum MVAr
- setMaxQ(int, float) - Method in interface com.powerdata.openpa.SVCList
-
- setMaxQ(float[]) - Method in interface com.powerdata.openpa.SVCList
-
- setMergeDelimiters(boolean) - Method in class com.powerdata.openpa.tools.StringParse
-
- setMeta(String) - Method in class com.powerdata.openpa.tools.SimpleCSV
-
- setMinAng(float) - Method in class com.powerdata.openpa.PhaseShifter
-
- setMinAng(int, float) - Method in interface com.powerdata.openpa.PhaseShifterList
-
- setMinAng(float[]) - Method in interface com.powerdata.openpa.PhaseShifterList
-
- setMinKV(float) - Method in class com.powerdata.openpa.Transformer
-
- setMinKV(int, float) - Method in interface com.powerdata.openpa.TransformerList
-
- setMinKV(float[]) - Method in interface com.powerdata.openpa.TransformerList
-
- setMinQ(float) - Method in class com.powerdata.openpa.Gen
-
Minimum generator reactive power output (MVAr)
- setMinQ(int, float) - Method in interface com.powerdata.openpa.GenList
-
- setMinQ(float[]) - Method in interface com.powerdata.openpa.GenList
-
- setMinQ(float) - Method in class com.powerdata.openpa.SVC
-
set minimum MVAr
- setMinQ(int, float) - Method in interface com.powerdata.openpa.SVCList
-
- setMinQ(float[]) - Method in interface com.powerdata.openpa.SVCList
-
- setMode(Gen.Mode) - Method in class com.powerdata.openpa.Gen
-
- setMode(int, Gen.Mode) - Method in interface com.powerdata.openpa.GenList
-
- setMode(Gen.Mode[]) - Method in interface com.powerdata.openpa.GenList
-
- setModelDescription(String) - Method in class com.powerdata.openpa.tools.psmfmt.PsmFmtExport
-
- setModelName(String) - Method in class com.powerdata.openpa.tools.psmfmt.PsmFmtExport
-
- setModelVersion(String) - Method in class com.powerdata.openpa.tools.psmfmt.PsmFmtExport
-
- setName(String) - Method in class com.powerdata.openpa.AbstractBaseObject
-
- setName(int, String) - Method in class com.powerdata.openpa.ACBranchList
-
- setName(String[]) - Method in class com.powerdata.openpa.ACBranchList
-
- setName(int, String) - Method in interface com.powerdata.openpa.BaseList
-
- setName(String[]) - Method in interface com.powerdata.openpa.BaseList
-
set name of object
- setName(String) - Method in interface com.powerdata.openpa.BaseObject
-
set object name
- setName(int, String) - Method in class com.powerdata.openpa.FixedShuntList
-
- setName(String[]) - Method in class com.powerdata.openpa.FixedShuntList
-
- setName(int, String) - Method in class com.powerdata.openpa.OneTermDevList
-
- setName(String[]) - Method in class com.powerdata.openpa.OneTermDevList
-
- setName(int, String) - Method in class com.powerdata.openpa.TwoTermDevList
-
- setName(String[]) - Method in class com.powerdata.openpa.TwoTermDevList
-
- setOperableUnderLoad(boolean) - Method in class com.powerdata.openpa.Switch
-
- setOperableUnderLoad(int, boolean) - Method in interface com.powerdata.openpa.SwitchList
-
- setOperableUnderLoad(boolean[]) - Method in interface com.powerdata.openpa.SwitchList
-
- setOpMaxP(float) - Method in class com.powerdata.openpa.Gen
-
max active power in MW
- setOpMaxP(int, float) - Method in interface com.powerdata.openpa.GenList
-
- setOpMaxP(float[]) - Method in interface com.powerdata.openpa.GenList
-
- setOpMinP(float) - Method in class com.powerdata.openpa.Gen
-
- setOpMinP(int, float) - Method in interface com.powerdata.openpa.GenList
-
- setOpMinP(float[]) - Method in interface com.powerdata.openpa.GenList
-
- setOutputMode(SVC.SVCState) - Method in class com.powerdata.openpa.SVC
-
set SVC output operating mode
- setOutputMode(int, SVC.SVCState) - Method in interface com.powerdata.openpa.SVCList
-
set SVC output operating mode
- setOutputMode(SVC.SVCState[]) - Method in interface com.powerdata.openpa.SVCList
-
set SVC output operating mode
- setOwner(Owner) - Method in class com.powerdata.openpa.Bus
-
- setOwner(int, Owner) - Method in interface com.powerdata.openpa.BusList
-
- setOwner(Owner[]) - Method in interface com.powerdata.openpa.BusList
-
- setP(int, float) - Method in class com.powerdata.openpa.FixedShuntList
-
- setP(float[]) - Method in class com.powerdata.openpa.FixedShuntList
-
- setP(float) - Method in class com.powerdata.openpa.OneTermDev
-
Set device active power in MW
- setP(int, float) - Method in class com.powerdata.openpa.OneTermDevList
-
- setP(float[]) - Method in class com.powerdata.openpa.OneTermDevList
-
- setP(int, float) - Method in interface com.powerdata.openpa.OneTermDevListIfc
-
- setP(float[]) - Method in interface com.powerdata.openpa.OneTermDevListIfc
-
- setParallel(boolean) - Method in class com.powerdata.openpa.pwrflow.BasicContingencyManager
-
- setPS(float) - Method in class com.powerdata.openpa.Gen
-
get the active power setpoint in MW
- setPS(int, float) - Method in interface com.powerdata.openpa.GenList
-
- setPS(float[]) - Method in interface com.powerdata.openpa.GenList
-
- setQ(int, float) - Method in class com.powerdata.openpa.FixedShuntList
-
- setQ(float[]) - Method in class com.powerdata.openpa.FixedShuntList
-
- setQ(float) - Method in class com.powerdata.openpa.OneTermDev
-
Set device reactive power in MVAr
- setQ(int, float) - Method in class com.powerdata.openpa.OneTermDevList
-
- setQ(float[]) - Method in class com.powerdata.openpa.OneTermDevList
-
- setQ(int, float) - Method in interface com.powerdata.openpa.OneTermDevListIfc
-
- setQ(float[]) - Method in interface com.powerdata.openpa.OneTermDevListIfc
-
- setQS(float) - Method in class com.powerdata.openpa.Gen
-
get the reactive power setpoint when not regulating voltage (MVAr)
- setQS(int, float) - Method in interface com.powerdata.openpa.GenList
-
- setQS(float[]) - Method in interface com.powerdata.openpa.GenList
-
- setQS(float) - Method in class com.powerdata.openpa.SVC
-
set MVAr setpoint used if AVR is off
- setQS(int, float) - Method in interface com.powerdata.openpa.SVCList
-
set MVAr setpoint used if AVR is off
- setQS(float[]) - Method in interface com.powerdata.openpa.SVCList
-
set MVAr setpoint used if AVR is off
- setQuoteChar(char) - Method in class com.powerdata.openpa.tools.StringParse
-
- setR(float) - Method in class com.powerdata.openpa.ACBranch
-
set resistance p.u.
- setR(int, float) - Method in class com.powerdata.openpa.ACBranchList
-
- setR(float[]) - Method in class com.powerdata.openpa.ACBranchList
-
- setR(int, float) - Method in interface com.powerdata.openpa.ACBranchListIfc
-
- setR(float[]) - Method in interface com.powerdata.openpa.ACBranchListIfc
-
- setReg(boolean) - Method in class com.powerdata.openpa.PhaseShifter
-
- setReg(int, boolean) - Method in interface com.powerdata.openpa.PhaseShifterList
-
set the presence of active power regulation
- setReg(boolean[]) - Method in interface com.powerdata.openpa.PhaseShifterList
-
set the presence of active power regulation
- setRegBus(Bus) - Method in class com.powerdata.openpa.Gen
-
- setRegBus(int, Bus) - Method in interface com.powerdata.openpa.GenList
-
- setRegBus(Bus[]) - Method in interface com.powerdata.openpa.GenList
-
- setRegBus(Bus) - Method in class com.powerdata.openpa.SVC
-
- setRegBus(int, Bus) - Method in interface com.powerdata.openpa.SVCList
-
- setRegBus(Bus[]) - Method in interface com.powerdata.openpa.SVCList
-
- setRegBus(int, Bus) - Method in interface com.powerdata.openpa.TransformerList
-
- setRegBus(Bus[]) - Method in interface com.powerdata.openpa.TransformerList
-
- setRegEnabled(boolean) - Method in class com.powerdata.openpa.Transformer
-
- setRegEnabled(int, boolean) - Method in interface com.powerdata.openpa.TransformerList
-
- setRegEnabled(boolean[]) - Method in interface com.powerdata.openpa.TransformerList
-
- setRegKV(boolean) - Method in class com.powerdata.openpa.Gen
-
is unit regulating voltage
- setRegKV(int, boolean) - Method in interface com.powerdata.openpa.GenList
-
- setRegKV(boolean[]) - Method in interface com.powerdata.openpa.GenList
-
- setRegKV(boolean) - Method in class com.powerdata.openpa.SVC
-
is regulating voltage
- setRegKV(int, boolean) - Method in interface com.powerdata.openpa.SVCList
-
- setRegKV(boolean[]) - Method in interface com.powerdata.openpa.SVCList
-
- setRegMaxMW(float) - Method in class com.powerdata.openpa.PhaseShifter
-
- setRegMaxMW(int, float) - Method in interface com.powerdata.openpa.PhaseShifterList
-
- setRegMaxMW(float[]) - Method in interface com.powerdata.openpa.PhaseShifterList
-
- setRegMinMW(float) - Method in class com.powerdata.openpa.PhaseShifter
-
- setRegMinMW(int, float) - Method in interface com.powerdata.openpa.PhaseShifterList
-
- setRegMinMW(float[]) - Method in interface com.powerdata.openpa.PhaseShifterList
-
- setScalingFactor(int, float) - Method in class com.powerdata.openpa.ImpedanceCorrectionList.ImpedanceCorrection
-
- setScalingFactor(float[]) - Method in class com.powerdata.openpa.ImpedanceCorrectionList.ImpedanceCorrection
-
- setScalingFactor(int, int, float) - Method in interface com.powerdata.openpa.ImpedanceCorrectionList
-
- setScalingFactor(int, float[]) - Method in interface com.powerdata.openpa.ImpedanceCorrectionList
-
- setScalingFactor(float[]) - Method in interface com.powerdata.openpa.ImpedanceCorrectionList
-
- SetSchemeInputClass(String, String) - Static method in class com.powerdata.openpa.PflowModelBuilder
-
Set a scheme to input class name translation.
- setShift(float) - Method in class com.powerdata.openpa.ACBranch
-
set phase shift through branch in Degrees
- setShift(int, float) - Method in class com.powerdata.openpa.ACBranchList
-
- setShift(float[]) - Method in class com.powerdata.openpa.ACBranchList
-
- setShift(int, float) - Method in interface com.powerdata.openpa.ACBranchListIfc
-
- setShift(float[]) - Method in interface com.powerdata.openpa.ACBranchListIfc
-
- setSize(int) - Method in class com.powerdata.openpa.tools.ComplexListBase
-
- setSize(int, int) - Method in class com.powerdata.openpa.tools.matrix.FloatArrayMatrix
-
- setSlackActivationTolerance(float) - Method in class com.powerdata.openpa.pwrflow.FDPowerFlow
-
Set the slack activation tolerance.
- setSlope(float) - Method in class com.powerdata.openpa.SVC
-
set slope (kV/MVAr per-unit on largest magnitude admittance limit)
- setSlope(int, float) - Method in interface com.powerdata.openpa.SVCList
-
set slope (kV/MVAr per-cent on largest magnitude admittance limit)
- setSlope(float[]) - Method in interface com.powerdata.openpa.SVCList
-
set slope (kV/MVAr per-cent on largest magnitude admittance limit)
- setState(Switch.State) - Method in class com.powerdata.openpa.Switch
-
- setState(int, Switch.State) - Method in interface com.powerdata.openpa.SwitchList
-
- setState(Switch.State[]) - Method in interface com.powerdata.openpa.SwitchList
-
- setStation(Station) - Method in class com.powerdata.openpa.Bus
-
- setStation(int, Station) - Method in interface com.powerdata.openpa.BusList
-
- setStation(Station[]) - Method in interface com.powerdata.openpa.BusList
-
- setSteamSupply(int, SteamTurbine.SteamSupply) - Method in interface com.powerdata.openpa.SteamTurbineList
-
- setSvcVRegEnabled(boolean) - Method in class com.powerdata.openpa.PflowModelBuilder
-
- setTap(int, float) - Method in class com.powerdata.openpa.ImpedanceCorrectionList.ImpedanceCorrection
-
- setTap(float[]) - Method in class com.powerdata.openpa.ImpedanceCorrectionList.ImpedanceCorrection
-
- setTap(int, int, float) - Method in interface com.powerdata.openpa.ImpedanceCorrectionList
-
- setTap(int, float[]) - Method in interface com.powerdata.openpa.ImpedanceCorrectionList
-
- setTap(float[]) - Method in interface com.powerdata.openpa.ImpedanceCorrectionList
-
- setTapBus(int, Bus) - Method in interface com.powerdata.openpa.TransformerList
-
- setTapBus(Bus[]) - Method in interface com.powerdata.openpa.TransformerList
-
- setToBchg(float) - Method in class com.powerdata.openpa.ACBranch
-
set to-side charging susceptance
- setToBchg(int, float) - Method in class com.powerdata.openpa.ACBranchList
-
- setToBchg(float[]) - Method in class com.powerdata.openpa.ACBranchList
-
- setToBchg(int, float) - Method in interface com.powerdata.openpa.ACBranchListIfc
-
- setToBchg(float[]) - Method in interface com.powerdata.openpa.ACBranchListIfc
-
- setToBchg(int, float) - Method in interface com.powerdata.openpa.LineList
-
- setToBchg(float[]) - Method in interface com.powerdata.openpa.LineList
-
- setToBus(int, Bus) - Method in class com.powerdata.openpa.ACBranchList
-
- setToBus(Bus[]) - Method in class com.powerdata.openpa.ACBranchList
-
- setToBus(int, Bus) - Method in class com.powerdata.openpa.TwoTermDevList
-
- setToBus(Bus[]) - Method in class com.powerdata.openpa.TwoTermDevList
-
- setToBus(int, Bus) - Method in interface com.powerdata.openpa.TwoTermDevListIfc
-
- setToBus(Bus[]) - Method in interface com.powerdata.openpa.TwoTermDevListIfc
-
- setToMaxTap(float) - Method in class com.powerdata.openpa.Transformer
-
- setToMaxTap(int, float) - Method in interface com.powerdata.openpa.TransformerList
-
- setToMaxTap(float[]) - Method in interface com.powerdata.openpa.TransformerList
-
- setToMinTap(float) - Method in class com.powerdata.openpa.Transformer
-
- setToMinTap(int, float) - Method in interface com.powerdata.openpa.TransformerList
-
- setToMinTap(float[]) - Method in interface com.powerdata.openpa.TransformerList
-
- setToP(int, float) - Method in class com.powerdata.openpa.ACBranchList
-
- setToP(float[]) - Method in class com.powerdata.openpa.ACBranchList
-
- setToP(float) - Method in class com.powerdata.openpa.TwoTermDev
-
to-side active power (MW)
- setToP(int, float) - Method in class com.powerdata.openpa.TwoTermDevList
-
- setToP(float[]) - Method in class com.powerdata.openpa.TwoTermDevList
-
- setToP(int, float) - Method in interface com.powerdata.openpa.TwoTermDevListIfc
-
- setToP(float[]) - Method in interface com.powerdata.openpa.TwoTermDevListIfc
-
- setToQ(int, float) - Method in class com.powerdata.openpa.ACBranchList
-
- setToQ(float[]) - Method in class com.powerdata.openpa.ACBranchList
-
- setToQ(float) - Method in class com.powerdata.openpa.TwoTermDev
-
to-side reactive power (MVAr)
- setToQ(int, float) - Method in class com.powerdata.openpa.TwoTermDevList
-
- setToQ(float[]) - Method in class com.powerdata.openpa.TwoTermDevList
-
- setToQ(int, float) - Method in interface com.powerdata.openpa.TwoTermDevListIfc
-
- setToQ(float[]) - Method in interface com.powerdata.openpa.TwoTermDevListIfc
-
- setToStepSize(float) - Method in class com.powerdata.openpa.Transformer
-
- setToStepSize(int, float) - Method in interface com.powerdata.openpa.TransformerList
-
- setToStepSize(float[]) - Method in interface com.powerdata.openpa.TransformerList
-
- setToTap(float) - Method in class com.powerdata.openpa.ACBranch
-
set to-side off-nominal tap ratio p.u on 100MVA base and bus base KV
- setToTap(int, float) - Method in class com.powerdata.openpa.ACBranchList
-
- setToTap(float[]) - Method in class com.powerdata.openpa.ACBranchList
-
- setToTap(int, float) - Method in interface com.powerdata.openpa.ACBranchListIfc
-
- setToTap(float[]) - Method in interface com.powerdata.openpa.ACBranchListIfc
-
- setTransitTime(float) - Method in class com.powerdata.openpa.Switch
-
- setTransitTime(int, float) - Method in interface com.powerdata.openpa.SwitchList
-
- setTransitTime(float[]) - Method in interface com.powerdata.openpa.SwitchList
-
- setType(Gen.Type) - Method in class com.powerdata.openpa.Gen
-
- setType(int, Gen.Type) - Method in interface com.powerdata.openpa.GenList
-
- setType(Gen.Type[]) - Method in interface com.powerdata.openpa.GenList
-
- setUnitActiveLimitTolerance(float) - Method in class com.powerdata.openpa.pwrflow.FDPowerFlow
-
Set the unit active limit tolerance.
- setUnitRegOverride(boolean) - Method in class com.powerdata.openpa.PflowModelBuilder
-
ignore case unit setpoints, and substitute case voltage at unit terminal
bus
- setupActiveGens(PAModel, float) - Static method in class com.powerdata.openpa.pwrflow.ACPowerCalc
-
Review the model for generats that are in-service and turning.
- setupActiveLoads(PAModel, float) - Static method in class com.powerdata.openpa.pwrflow.ACPowerCalc
-
Provide a standard interface to retrieve desired active and reactive
power
- setupFixedShunts(PAModel) - Static method in class com.powerdata.openpa.pwrflow.ACPowerCalc
-
Review the model for fixed shunts that are in-service
- setVA(float) - Method in class com.powerdata.openpa.Bus
-
set voltage angle in degrees
- setVA(int, float) - Method in interface com.powerdata.openpa.BusList
-
- setVA(float[]) - Method in interface com.powerdata.openpa.BusList
-
- setValue(int, int, JacobianElement) - Method in class com.powerdata.openpa.tools.matrix.ArrayJacobianMatrix
-
- setValue(int, int, float) - Method in class com.powerdata.openpa.tools.matrix.FloatArrayMatrix
-
- setValue(int, int, float) - Method in interface com.powerdata.openpa.tools.matrix.FloatMatrix
-
Set a value
- setValue(int, int, T) - Method in interface com.powerdata.openpa.tools.matrix.Matrix
-
Set a value
- setValue(int, int, float) - Method in class com.powerdata.openpa.tools.matrix.SpSymFltMatrix
-
- setVM(float) - Method in class com.powerdata.openpa.Bus
-
set voltage magnitude in kV
- setVM(int, float) - Method in interface com.powerdata.openpa.BusList
-
- setVM(float[]) - Method in interface com.powerdata.openpa.BusList
-
- setVoltageLevel(VoltageLevel) - Method in class com.powerdata.openpa.Bus
-
- setVoltageLevel(int, VoltageLevel) - Method in interface com.powerdata.openpa.BusList
-
- setVoltageLevel(VoltageLevel[]) - Method in interface com.powerdata.openpa.BusList
-
- setVS(float) - Method in class com.powerdata.openpa.Gen
-
voltage setpoint in KV, used if regulating voltage
- setVS(int, float) - Method in interface com.powerdata.openpa.GenList
-
- setVS(float[]) - Method in interface com.powerdata.openpa.GenList
-
- setVS(float) - Method in class com.powerdata.openpa.SVC
-
voltage setpoint in KV, used if regulating voltage
- setVS(int, float) - Method in interface com.powerdata.openpa.SVCList
-
- setVS(float[]) - Method in interface com.powerdata.openpa.SVCList
-
- setWhiteSpace(String) - Method in class com.powerdata.openpa.tools.StringParse
-
- setX(float) - Method in class com.powerdata.openpa.ACBranch
-
set reactance p.u.
- setX(int, float) - Method in class com.powerdata.openpa.ACBranchList
-
- setX(float[]) - Method in class com.powerdata.openpa.ACBranchList
-
- setX(int, float) - Method in interface com.powerdata.openpa.ACBranchListIfc
-
- setX(float[]) - Method in interface com.powerdata.openpa.ACBranchListIfc
-
- ShiftFactorModelBuilder - Class in com.powerdata.openpa.pwrflow
-
- ShiftFactorModelBuilder(PAModel, Bus, Bus) - Constructor for class com.powerdata.openpa.pwrflow.ShiftFactorModelBuilder
-
- ShuntCapacitor - Class in com.powerdata.openpa
-
- ShuntCapacitor(ShuntCapList, int) - Constructor for class com.powerdata.openpa.ShuntCapacitor
-
- ShuntCapacitor - Enum in com.powerdata.openpa.tools.psmfmt
-
- ShuntCapacitorOPA - Class in com.powerdata.openpa.tools.psmfmt
-
- ShuntCapacitorOPA(PAModel, BusRefIndex) - Constructor for class com.powerdata.openpa.tools.psmfmt.ShuntCapacitorOPA
-
- ShuntCapList - Interface in com.powerdata.openpa
-
- ShuntCapList.ListAccess<R> - Interface in com.powerdata.openpa
-
- ShuntReacList - Interface in com.powerdata.openpa
-
- ShuntReacList.ListAccess<R> - Interface in com.powerdata.openpa
-
- ShuntReactor - Class in com.powerdata.openpa
-
- ShuntReactor(ShuntReacList, int) - Constructor for class com.powerdata.openpa.ShuntReactor
-
- ShuntReactor - Enum in com.powerdata.openpa.tools.psmfmt
-
- ShuntReactorOPA - Class in com.powerdata.openpa.tools.psmfmt
-
- ShuntReactorOPA(PAModel, BusRefIndex) - Constructor for class com.powerdata.openpa.tools.psmfmt.ShuntReactorOPA
-
- SimpleCSV - Class in com.powerdata.openpa.tools
-
Utility to easily read and write CSV files.
- SimpleCSV() - Constructor for class com.powerdata.openpa.tools.SimpleCSV
-
- SimpleCSV(InputStream) - Constructor for class com.powerdata.openpa.tools.SimpleCSV
-
- SimpleCSV(String) - Constructor for class com.powerdata.openpa.tools.SimpleCSV
-
- SimpleCSV(File) - Constructor for class com.powerdata.openpa.tools.SimpleCSV
-
- SingleBus() - Static method in class com.powerdata.openpa.pwrflow.PwrAppModelBldr.Topology
-
- size() - Method in class com.powerdata.openpa.ACBranchList
-
- size() - Method in interface com.powerdata.openpa.ColChange
-
get number of changes
- size() - Method in class com.powerdata.openpa.FixedShuntList
-
- size() - Method in interface com.powerdata.openpa.GroupIndex
-
- size() - Method in class com.powerdata.openpa.OneTermDevList
-
- size() - Method in class com.powerdata.openpa.pwrflow.ACBranchExtList
-
- size() - Method in class com.powerdata.openpa.pwrflow.BMtrxElemBldr
-
Deprecated.
- size() - Method in class com.powerdata.openpa.pwrflow.ContingencySet
-
- size() - Method in class com.powerdata.openpa.pwrflow.ConvergenceList
-
- size() - Method in class com.powerdata.openpa.pwrflow.FixedShuntCalcList
-
- size() - Method in class com.powerdata.openpa.pwrflow.SVCCalcList
-
- size() - Method in class com.powerdata.openpa.tools.ComplexListBase
-
- size() - Method in class com.powerdata.openpa.tools.ComplexSublist
-
- size() - Method in class com.powerdata.openpa.tools.matrix.JacobianArrayList
-
- size() - Method in class com.powerdata.openpa.tools.matrix.SpSymMtrxFactPattern.EliminatedNodeList
-
- size() - Method in class com.powerdata.openpa.tools.SNdxKeyOfs
-
- size() - Method in class com.powerdata.openpa.TwoTermDevList
-
- SNdxKeyOfs - Class in com.powerdata.openpa.tools
-
- SNdxKeyOfs() - Constructor for class com.powerdata.openpa.tools.SNdxKeyOfs
-
- solve(float[]) - Method in class com.powerdata.openpa.tools.matrix.FactorizedFltMatrix
-
convenience method to solve the matrix by running both forward reduction
and backward substitution
- SortedIntOfsNdx - Class in com.powerdata.openpa.tools
-
- SortedIntOfsNdx(int[]) - Constructor for class com.powerdata.openpa.tools.SortedIntOfsNdx
-
- SpSymFltMatrix - Class in com.powerdata.openpa.tools.matrix
-
Sparse Symmetric matrix with a floating-point value.
- SpSymMtrxFactorizer - Class in com.powerdata.openpa.tools.matrix
-
Symmetric (Sparse) Matrix factorization base.
- SpSymMtrxFactorizer() - Constructor for class com.powerdata.openpa.tools.matrix.SpSymMtrxFactorizer
-
- SpSymMtrxFactPattern - Class in com.powerdata.openpa.tools.matrix
-
Symmetric (Sparse) Matrix factorization pattern.
- SpSymMtrxFactPattern() - Constructor for class com.powerdata.openpa.tools.matrix.SpSymMtrxFactPattern
-
- SpSymMtrxFactPattern.EliminatedNode - Class in com.powerdata.openpa.tools.matrix
-
- SpSymMtrxFactPattern.EliminatedNodeList - Class in com.powerdata.openpa.tools.matrix
-
- star() - Method in class com.powerdata.openpa.tools.DeltaNetwork
-
- StarNetwork - Class in com.powerdata.openpa.tools
-
Contain star-network impedance and provide conversion to delta-network
representation
- StarNetwork(Complex, Complex, Complex) - Constructor for class com.powerdata.openpa.tools.StarNetwork
-
- StateEstimator - Class in com.powerdata.openpa.se
-
Estimate measurements using Given's Rotation.
- StateEstimator(PAModel) - Constructor for class com.powerdata.openpa.se.StateEstimator
-
- StateEstimator.EstimateConsumer - Interface in com.powerdata.openpa.se
-
Iterate through the measurement order, providing measured and estimated values
- Station - Class in com.powerdata.openpa
-
- Station(StationList, int) - Constructor for class com.powerdata.openpa.Station
-
- StationList - Interface in com.powerdata.openpa
-
- StationList.ListAccess<R> - Interface in com.powerdata.openpa
-
- SteamTurbine - Class in com.powerdata.openpa
-
- SteamTurbine(SteamTurbineList, int) - Constructor for class com.powerdata.openpa.SteamTurbine
-
- SteamTurbine.SteamSupply - Enum in com.powerdata.openpa
-
- SteamTurbineList - Interface in com.powerdata.openpa
-
- SteamTurbineList.ListAccess<R> - Interface in com.powerdata.openpa
-
- step1KnownBranch(int, int) - Method in interface com.powerdata.openpa.se.ObservableIslandList.Debug
-
The DOE paper step 1, where unknown branches are evaluated to
determine if both buses reside in the same island
- step2Merge(int, int, int) - Method in interface com.powerdata.openpa.se.ObservableIslandList.Debug
-
DOE psper step 2, where a merge occurs
- String(SimpleCSV, String, Object, String) - Static method in class com.powerdata.openpa.tools.LoadArray
-
- StringParse - Class in com.powerdata.openpa.tools
-
- StringParse(String, String, boolean) - Constructor for class com.powerdata.openpa.tools.StringParse
-
- StringParse(String, String) - Constructor for class com.powerdata.openpa.tools.StringParse
-
- StringParse(String) - Constructor for class com.powerdata.openpa.tools.StringParse
-
- stringValues() - Method in interface com.powerdata.openpa.ColChange
-
access changes as an array of Strings
- StringWrap(ExportOpenPA.ListAccess) - Constructor for class com.powerdata.openpa.tools.psmfmt.ExportOpenPA.StringWrap
-
- sub(Complex) - Method in class com.powerdata.openpa.tools.Complex
-
subtract two complex numbers
- sub(float, float) - Method in class com.powerdata.openpa.tools.Complex
-
subtract two complex numbers
- subInPlace(int, int, JacobianElement) - Method in class com.powerdata.openpa.tools.matrix.ArrayJacobianMatrix
-
- subInPlace(int, int, float) - Method in interface com.powerdata.openpa.tools.matrix.FloatMatrix
-
subtract a value in place
- subInPlace(int, int, JacobianElement) - Method in interface com.powerdata.openpa.tools.matrix.JacobianMatrix
-
- subInPlace(int, int, T) - Method in interface com.powerdata.openpa.tools.matrix.Matrix
-
subtract a value in place
- SubLists - Class in com.powerdata.openpa
-
- SubLists() - Constructor for class com.powerdata.openpa.SubLists
-
- Substation - Enum in com.powerdata.openpa.tools.psmfmt
-
- SubstationOPA - Class in com.powerdata.openpa.tools.psmfmt
-
- SubstationOPA(PAModel) - Constructor for class com.powerdata.openpa.tools.psmfmt.SubstationOPA
-
- SummaryMismatchReporter - Class in com.powerdata.openpa.pwrflow
-
- SummaryMismatchReporter(File) - Constructor for class com.powerdata.openpa.pwrflow.SummaryMismatchReporter
-
- SVC - Class in com.powerdata.openpa
-
- SVC(SVCList, int) - Constructor for class com.powerdata.openpa.SVC
-
- SVC - Enum in com.powerdata.openpa.tools.psmfmt
-
- SVC.SVCState - Enum in com.powerdata.openpa
-
- SVCCalcList - Class in com.powerdata.openpa.pwrflow
-
Calculate SVC injections (and B'' entry) based on bus voltage mag.
- SVCCalcList(PAModel, SVCList) - Constructor for class com.powerdata.openpa.pwrflow.SVCCalcList
-
Create a new calculation list
- SVCCalcList.SVCCalc - Class in com.powerdata.openpa.pwrflow
-
- SVCList - Interface in com.powerdata.openpa
-
- SVCList.ListAccess<R> - Interface in com.powerdata.openpa
-
- SvcOPA - Class in com.powerdata.openpa.tools.psmfmt
-
- SvcOPA(PAModel, BusRefIndex) - Constructor for class com.powerdata.openpa.tools.psmfmt.SvcOPA
-
- Switch - Class in com.powerdata.openpa
-
- Switch(SwitchList, int) - Constructor for class com.powerdata.openpa.Switch
-
- Switch - Enum in com.powerdata.openpa.tools.psmfmt
-
- Switch.State - Enum in com.powerdata.openpa
-
- SwitchedShunt - Static variable in class com.powerdata.openpa.psseraw.PsseClassSetVersion29
-
- SwitchedShunt - Class in com.powerdata.openpa
-
- SwitchedShunt(SwitchedShuntList, int) - Constructor for class com.powerdata.openpa.SwitchedShunt
-
- SwitchedShunt30 - Static variable in class com.powerdata.openpa.psseraw.PsseClassSetVersion30
-
- SwitchedShuntList - Interface in com.powerdata.openpa
-
- SwitchedShuntList.ListAccess<R> - Interface in com.powerdata.openpa
-
- SwitchList - Interface in com.powerdata.openpa
-
- SwitchList.ListAccess<R> - Interface in com.powerdata.openpa
-
- SwitchOPA - Class in com.powerdata.openpa.tools.psmfmt
-
- SwitchOPA(PAModel, BusRefIndex) - Constructor for class com.powerdata.openpa.tools.psmfmt.SwitchOPA
-
- SwitchType - Enum in com.powerdata.openpa.tools.psmfmt
-
- SwitchTypeOPA - Class in com.powerdata.openpa.tools.psmfmt
-
- SwitchTypeOPA() - Constructor for class com.powerdata.openpa.tools.psmfmt.SwitchTypeOPA
-
- SynchronousMachine - Enum in com.powerdata.openpa.tools.psmfmt
-
- SynchronousMachineOPA - Class in com.powerdata.openpa.tools.psmfmt
-
- SynchronousMachineOPA(PAModel, BusRefIndex) - Constructor for class com.powerdata.openpa.tools.psmfmt.SynchronousMachineOPA
-
- valueOf(String) - Static method in enum com.powerdata.openpa.ColumnMeta
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum com.powerdata.openpa.Gen.Mode
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum com.powerdata.openpa.Gen.Type
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum com.powerdata.openpa.ListMetaType
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum com.powerdata.openpa.PhaseShifter.ControlMode
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum com.powerdata.openpa.psseraw.PsseFieldType
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum com.powerdata.openpa.psseraw.PsseRepository.CaseFormat
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum com.powerdata.openpa.psseraw.PsseRepository.PsmFormat
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum com.powerdata.openpa.pwrflow.BusType
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum com.powerdata.openpa.pwrflow.CAWorker.Status
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum com.powerdata.openpa.pwrflow.ConvergenceList.Status
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum com.powerdata.openpa.pwrflow.ConvergenceList.StatusP
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum com.powerdata.openpa.pwrflow.ConvergenceList.StatusQ
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum com.powerdata.openpa.pwrflow.ConvergenceList.TerminateCondition
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum com.powerdata.openpa.pwrflow.Mismatch.Status
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum com.powerdata.openpa.SteamTurbine.SteamSupply
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum com.powerdata.openpa.SVC.SVCState
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum com.powerdata.openpa.Switch.State
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum com.powerdata.openpa.tools.psmfmt.CaseGeneratingUnit
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum com.powerdata.openpa.tools.psmfmt.CaseLine
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum com.powerdata.openpa.tools.psmfmt.CaseLoad
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum com.powerdata.openpa.tools.psmfmt.CaseNode
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum com.powerdata.openpa.tools.psmfmt.CasePhaseTapChanger
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum com.powerdata.openpa.tools.psmfmt.CaseRatioTapChanger
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum com.powerdata.openpa.tools.psmfmt.CaseSeriesCapacitor
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum com.powerdata.openpa.tools.psmfmt.CaseSeriesReactor
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum com.powerdata.openpa.tools.psmfmt.CaseSVC
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum com.powerdata.openpa.tools.psmfmt.CaseSwitch
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum com.powerdata.openpa.tools.psmfmt.CaseSynchronousMachine
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum com.powerdata.openpa.tools.psmfmt.CaseTransformerWinding
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum com.powerdata.openpa.tools.psmfmt.ControlArea
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum com.powerdata.openpa.tools.psmfmt.GeneratingUnit
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum com.powerdata.openpa.tools.psmfmt.ImpedanceCorrection
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum com.powerdata.openpa.tools.psmfmt.Line
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum com.powerdata.openpa.tools.psmfmt.Load
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum com.powerdata.openpa.tools.psmfmt.ModelParameter
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum com.powerdata.openpa.tools.psmfmt.Node
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum com.powerdata.openpa.tools.psmfmt.Organization
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum com.powerdata.openpa.tools.psmfmt.PhaseTapChanger
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum com.powerdata.openpa.tools.psmfmt.PrimeMover
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum com.powerdata.openpa.tools.psmfmt.PsmCaseFmtObject
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum com.powerdata.openpa.tools.psmfmt.PsmMdlFmtObject
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum com.powerdata.openpa.tools.psmfmt.RatioTapChanger
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum com.powerdata.openpa.tools.psmfmt.ReactiveCapabilityCurve
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum com.powerdata.openpa.tools.psmfmt.SeriesCapacitor
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum com.powerdata.openpa.tools.psmfmt.SeriesReactor
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum com.powerdata.openpa.tools.psmfmt.ShuntCapacitor
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum com.powerdata.openpa.tools.psmfmt.ShuntReactor
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum com.powerdata.openpa.tools.psmfmt.Substation
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum com.powerdata.openpa.tools.psmfmt.SVC
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum com.powerdata.openpa.tools.psmfmt.Switch
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum com.powerdata.openpa.tools.psmfmt.SwitchType
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum com.powerdata.openpa.tools.psmfmt.SynchronousMachine
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum com.powerdata.openpa.tools.psmfmt.Transformer
-
Returns the enum constant of this type with the specified name.
- valueOf(String) - Static method in enum com.powerdata.openpa.tools.psmfmt.TransformerWinding
-
Returns the enum constant of this type with the specified name.
- values() - Static method in enum com.powerdata.openpa.ColumnMeta
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum com.powerdata.openpa.Gen.Mode
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum com.powerdata.openpa.Gen.Type
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum com.powerdata.openpa.ListMetaType
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum com.powerdata.openpa.PhaseShifter.ControlMode
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum com.powerdata.openpa.psseraw.PsseFieldType
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum com.powerdata.openpa.psseraw.PsseRepository.CaseFormat
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum com.powerdata.openpa.psseraw.PsseRepository.PsmFormat
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum com.powerdata.openpa.pwrflow.BusType
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum com.powerdata.openpa.pwrflow.CAWorker.Status
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum com.powerdata.openpa.pwrflow.ConvergenceList.Status
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum com.powerdata.openpa.pwrflow.ConvergenceList.StatusP
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum com.powerdata.openpa.pwrflow.ConvergenceList.StatusQ
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum com.powerdata.openpa.pwrflow.ConvergenceList.TerminateCondition
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum com.powerdata.openpa.pwrflow.Mismatch.Status
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum com.powerdata.openpa.SteamTurbine.SteamSupply
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum com.powerdata.openpa.SVC.SVCState
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum com.powerdata.openpa.Switch.State
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum com.powerdata.openpa.tools.psmfmt.CaseGeneratingUnit
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum com.powerdata.openpa.tools.psmfmt.CaseLine
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum com.powerdata.openpa.tools.psmfmt.CaseLoad
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum com.powerdata.openpa.tools.psmfmt.CaseNode
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum com.powerdata.openpa.tools.psmfmt.CasePhaseTapChanger
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum com.powerdata.openpa.tools.psmfmt.CaseRatioTapChanger
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum com.powerdata.openpa.tools.psmfmt.CaseSeriesCapacitor
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum com.powerdata.openpa.tools.psmfmt.CaseSeriesReactor
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum com.powerdata.openpa.tools.psmfmt.CaseSVC
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum com.powerdata.openpa.tools.psmfmt.CaseSwitch
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum com.powerdata.openpa.tools.psmfmt.CaseSynchronousMachine
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum com.powerdata.openpa.tools.psmfmt.CaseTransformerWinding
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum com.powerdata.openpa.tools.psmfmt.ControlArea
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum com.powerdata.openpa.tools.psmfmt.GeneratingUnit
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum com.powerdata.openpa.tools.psmfmt.ImpedanceCorrection
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum com.powerdata.openpa.tools.psmfmt.Line
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum com.powerdata.openpa.tools.psmfmt.Load
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum com.powerdata.openpa.tools.psmfmt.ModelParameter
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum com.powerdata.openpa.tools.psmfmt.Node
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum com.powerdata.openpa.tools.psmfmt.Organization
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum com.powerdata.openpa.tools.psmfmt.PhaseTapChanger
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum com.powerdata.openpa.tools.psmfmt.PrimeMover
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum com.powerdata.openpa.tools.psmfmt.PsmCaseFmtObject
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum com.powerdata.openpa.tools.psmfmt.PsmMdlFmtObject
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum com.powerdata.openpa.tools.psmfmt.RatioTapChanger
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum com.powerdata.openpa.tools.psmfmt.ReactiveCapabilityCurve
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum com.powerdata.openpa.tools.psmfmt.SeriesCapacitor
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum com.powerdata.openpa.tools.psmfmt.SeriesReactor
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum com.powerdata.openpa.tools.psmfmt.ShuntCapacitor
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum com.powerdata.openpa.tools.psmfmt.ShuntReactor
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum com.powerdata.openpa.tools.psmfmt.Substation
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum com.powerdata.openpa.tools.psmfmt.SVC
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum com.powerdata.openpa.tools.psmfmt.Switch
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum com.powerdata.openpa.tools.psmfmt.SwitchType
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum com.powerdata.openpa.tools.psmfmt.SynchronousMachine
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum com.powerdata.openpa.tools.psmfmt.Transformer
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- values() - Static method in enum com.powerdata.openpa.tools.psmfmt.TransformerWinding
-
Returns an array containing the constants of this enum type, in
the order they are declared.
- vmpu(BusList) - Static method in class com.powerdata.openpa.tools.PAMath
-
- vmpu(Bus) - Static method in class com.powerdata.openpa.tools.PAMath
-
- VoltageLevel - Class in com.powerdata.openpa
-
- VoltageLevel(VoltageLevelList, int) - Constructor for class com.powerdata.openpa.VoltageLevel
-
- VoltageLevelList - Interface in com.powerdata.openpa
-
- VoltageLevelList.ListAccess<R> - Interface in com.powerdata.openpa
-
- VoltageSetPoint - Class in com.powerdata.openpa.pwrflow
-
Monitor "remote" bus voltage and take action
- VoltageSetPoint(BusTypeUtil, BusList, int) - Constructor for class com.powerdata.openpa.pwrflow.VoltageSetPoint
-
- VoltageSetPoint.SetPoint - Interface in com.powerdata.openpa.pwrflow
-
- VSC_DCLine - Static variable in class com.powerdata.openpa.psseraw.PsseClassSetVersion29
-